Lenord+Bauer MiniCODER Operating Instructions Manual page 63

Lenord+Bauer
Material damage due to incorrect handling of the measuring surface!
The measuring surface is highly magnetic. Metallic objects in the vicinity of the prod-
uct can quickly result in sudden contact with the measuring surface. This can dam-
age the sensor elements and cause the measuring system to fail.
● Avoid sudden contact between the measuring surface and other objects.
● Observe the assembly sequence.
The measuring surface is printed with a protective layer. If the protective layer is de-
stroyed or removed, the measuring system may be damaged.
● Do not destroy or remove the protective layer on the measuring surface.
Material damage due to the application of force!
The product is a precision device. Impacts or other applications of force can dam-
age the product.
● Do not hit or step on the product.
● Avoid hard knocks.
● Do not bend any connector contacts.
● Do not drop the product.
The original packaging protects the product from shocks.
● Store and transport the product only in its original packaging.
● Do not remove the product from its original packaging until you are at the instal-
lation site.
GEL 2449M
Possible hazards 2 Safety
63