Picture; Adjust - NEC MultiSync SC40 User Manual

OSD Controls
oSD

PiCturE

BrigHtnESS
ContraSt
SHarPnESS
BLaCK LEVEL
tint
HDMi, DVD/HD, ViDEo, tV
input only
CoLor
HDMi, DVD/HD, ViDEo, tV
input only
CoLor tEMPEraturE
CoLor ControL
DVi, Vga, rgB/HV, HDMi
input only
gaMMa SELECtion
natiVE
2.2
2.4
S gaMMa
DiCoM SiM.
PrograMMaBLE
aDaPtiVE ContraSt
HDMi, DVD/HD, ViDEo, tV
input only
oFF
MiD
HigH
MoViE SEttingS
PiCturE rESEt

aDJuSt

auto SEtuP
Vga and rgB/HV input only
auto aDJuSt
Vga and rgB/HV input only
H PoSition
V PoSition
- continued
Setting
adjusts the overall image and background brightness. Press + or - to adjust.
adjusts the image brightness in relationship to the background. Press + or - to adjust.
note: the srgB picture mode is standard and cannot be changed.
adjusts the crispness of the image. Press + or - to adjust.
adjusts the image brightness in relationship to the background. Press + or - to adjust.
note: the srgB picture mode is standard and cannot be changed.
adjusts the tint of the screen. Press + or - to adjust.
adjusts the color depth of the screen. Press + or - to adjust.
adjusts the color temperature of the entire screen. a low color temperature will make
the screen reddish. a high color temperature will make the screen bluish.
Note: The sRGB picture mode is set to a predefined 6500 K standard
and connot be changed.
adjusts the levels of the red, Yellow, green, Cyan, Blue, Magenta and Saturation.
note: the srgB picture mode is standard and cannot be changed.
Select a display gamma for best picture quality.
note: the srgB picture mode is standard and cannot be changed.
gamma correction is handled by the LCD panel.
typical display gamma for use with a PC.
good for video (tV, DVD, etc.).
Special gamma for certain types of movies. raises the dark parts and lowers the
light parts of the image. (S-Curve)
DiCoM gSDF curve simulated for LCD type.
a programmable gamma curve can be loaded using nEC software.
Sets the level of adjusment for dynamic contrast.
noiSE rEDuCtion
ViDEo, tV input only adjusts the amount of noise reduction. Press + or - to adjust.
FiLM MoDE
HDMi, DVD/HD, ViDEo, tV
Selects Film mode.
input only
resets the following settings within the PiCturE menu back to factory setting:
BrigHtnESS, ContraSt, SHarPnESS, BLaCK LEVEL, tint, CoLor tEMPEraturE,
CoLor ControL , gaMMa SELECtion, aDaPtiVE ContraSt, MoViE SEttingS.
automatically adjusts screen size, H position, V position, Clock, Clock Phase, White
Level, and Black Level.
H Position, V Position and Clock Phase are adjusted automatically upon power on.
Controls the horizontal position of the image within the Display area of the LCD.
Press + to move right. Press - to move left.
Controls the vertical position of the image within the Display area of the LCD.
Press + to move up. Press - to move down.
English-26