Advanced Option - NEC MultiSync SC40 User Manual

OSD Controls
CHangE SECuritY
PaSSWorD
SECuritY LoCK
DDC/ Ci
DiSPLaY
ProtECtion rESEt

aDVanCED oPtion

inPut DEtECt
all inputs except for tV
nonE
FirSt DEtECt
LaSt DEtECt
ViDEo DEtECt
Long CaBLE on/oFF
Vga and rgB/HV input only
Long CaBLE ManuaL
Vga and rgB/HV input only
DVi MoDE
SCan ConVErSion
all inputs except for Vga,
rgB/ HV
ProgrESSiVE
intErLaCE
SCart MoDE
S-ViDEo MoDE
PrioritY
SEParatE
- continued
allows the security password to be changed. Factory preset password is 0000.
Locks the security password.
EnaBLE/ DiSEaBLE: turn on or off the two way communication and control of the monitor.
resets the following settings within the Picture menu back to factory setting:
PoWEr SaVE, StanDBY MoDE, Fan ControL, SCrEEn SaVEr, SiDE BorDEr
CoLor, auto BrigHtnESS.
Selects the method of input detection the monitor uses when more than two input
devices are connected.
the Monitor will not search the other video input ports.
When the current video input signal is not present, then the monitor searches for a
video signal from the other video input port. if the video signal is present in the other
port, then the monitor switches the video source input port to the new found video
source automatically. the monitor will not look for other video signals while the current
video source is present.
When the monitor is displaying a signal from the current source and a new secondary
source is supplied to the monitor, the monitor will automatically switch to
the new video source. When current video input signal is not present, the montor
searches for a video signal from the other video input port. if the video signal is present
in the other port, then the monitor switches the video source input port to the
new found video source automatically.
DVD/HD or ViDEo inputs will have priority over DVi, Vga, and rgB/HV. When DVD/HD
or ViDEo input signal is present the monitor will change and keep to the DVD/HD
or ViDEo input.
Compensates for image degradation caused from using a long cable.
Manually compensates for image degradation caused from using a long cable.
rED DELaY adjusts the phase of the red signal.
adjusts the phase of the green signal.
grEEn DELaY
adjusts the phase of the blue signal.
BLuE DELaY
rED SHarPnESS
adjusts the performance degradation of the rED signal.
grEEn SHarPnESS adjusts the performance degradation of the grEEn signal.
BLuE SHarPnESS adjusts the performance degradation of the BLuE signal.
Sog PEaK.
adjusts the shape of Sync on green signal.
ViDEo EQ.
optimize the shape (tailing) of rED, grEEn and BLuE signals.
rgB/HV input only
SYnC tErMinatE
Selects the terminate resistance for matching the cable impedance.
rgB/HV input only
Choose the DVi mode based on the input device connected via DVi connector.
DVi-PC When a PC or similar equipment is connected.
When a DVD player is connected.
DVi-HD
Selects the iP (interlace to Progressive) conversion function.
note: For DVi input "DVi-HD" needs to be enabled in the DVi mode.
Converts interlaced signals to progressive.
this is the default setting.
Disables iP conversion. this setting is best suited for motion pictures, but increases the
risk of image retention.
input mode for devices using SCart connectors.
Selects the S-Video input port function.
When an S-Video cable is connected to the S-Video input, it will have priority over
the composite input port.
the S-Video port and Composite port can be selected as independent input ports.
English-30