Part Names And Functions; Control Panel - NEC MultiSync SC40 User Manual
Nec multisync sc40: user guide
Hide thumbs
Also See for MultiSync SC40:
- Brochure (4 pages) ,
- Reference manual (3 pages) ,
- Specification (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
Control Panel
1) POWER
Switches the power on/off. See page 23.
2) MUTE
Switches the audio mute ON/OFF.
3) INPUT
Selects which signal connected to the display is shown.
([DVI], [VGA], [RGB/HV], [HDMI], [DVD/HD],
[VIDEO], [TV]
)
Acts as SET button within the OSD menu.
4) PLUS (+)
Increases the setting adjustment within OSD menu.
Increases the audio output level when the OSD is off.
5) MINUS (-)
Decreases the setting adjustment within OSD menu.
Decreases the audio output level when the OSD is off.
6) UP (▲)
Activates the OSD menu when the OSD menu is off.
Moves the highlighted area up to select which setting to be
adjust within OSD menu.
7) DOWN (▼)
Activates the OSD menu when the OSD menu is off.
Moves the highlighted area down to select which setting to
be adjust within OSD menu.
Denotes Optional Digital Tuner function.
Part Names and Functions
EXIT
INPUT
8
7
6
5
4
3
8) EXIT
Activates the OSD menu when the OSD menu is off.
Exits from the current menu being displayed to the
previous menu within the OSD.
9) Remote control sensor and Power indicator
Receives the signal when using the wireless remote control.
See page 14.
Glows green when the LCD monitor is in active mode.
Glows red when the LCD is in POWER OFF (ECO standby)
mode*. Glows Amber when the LCD is in POWER OFF
(standby) mode. Amber blinks when the monitor is in
Power Save Mode. Green and Amber blink alternately
while in Power Standby with the "SCHEDULE SETTINGS"
function enabled. When a component failure is detected
within the monitor, the indicator will blink red.
"*If "OFF" is selected in POWER INDICATOR(See page 26),
the LED will not light when the LCD monitor is active mode".
10) Main Power Switch
Seesaw Switch for the main power on/off.
Control Key Lock Mode
This function completely locks out access to all Control Key
functions.
To enable the Control Key Lock Mode, press both "
"
▼
seconds.
To go back to user mode, press both ""
simultaneously and hold down for three (3) seconds.
English-9
Control Buttons and Main Power
Switch are located underneath and
behind the bezel.
9
OFF
ON
10
MUTE
2
1
" buttons simultaneously and hold down for three (3)
▲
" and
▲
" and "
▼
" buttons
Advertisement
Table of Contents
