Table of Contents
Advertisement
Using Power Management
This function decreases the power consumption of the monitor when it is not in use.
When connected to a computer, power consumption by the monitor reduces automatically if the keyboard or mouse are not used
during the time set in the computer's power management settings. Refer to your computer's user manual for more information.
When connected to an AV source, such as a Blu-ray, DVD, or streaming video player, power consumption by the monitor
reduces automatically after a certain amount of time has passed since the monitor recognized "no signal input". This option
is set to [ENABLE] or [DISABLE] in the [POWER SAVE] settings under the [POWER SAVE SETTINGS] menu of the OSD.
See
page
80.
NOTEN:
• Depending on the computer and display card used, this function may not operate.
• After the video signal is lost, the monitor automatically turns off after a preset time period. Please refer to the [TIME
SETTING] in [POWER SAVE]
• Schedules can be created for the monitor to power on or standby at specific times. See
• Please refer to the [POWER SAVE] in [POWER SAVE SETTINGS] for the power management function.
Showing the Information OSD
The Information OSD provides information such as Input Source, etc.
Press the DISPLAY button on the remote control to bring up the Information OSD. Press the DISPLAY button again to close the
Information OSD.
NOTEN:
When the input signal is [Media Player], the information OSD will not be displayed.
Switching Between Picture Modes
Press the PICTURE MODE button on the wireless remote control to cycle through the picture modes [NATIVE], [RETAIL],
[CONFERENCING], [HIGHBRIGHT], [TRANSPORTATION] and [CUSTOM].
The picture modes are pre-configured with settings for general use. See
changing the picture mode settings.
page
80.
A
Input name
DisplayPort
3840 x 2160＠60Hz
B
Input Signal Information
HDR Information
C
Communication Info*
D
* Shows when [COMMUNICATION INFO] is [ON].
H
Green: Connected LAN
Red: Not connected LAN
English−35
"Using Picture Modes" on page 44
page
43.
for instructions on
Advertisement
Table of Contents
