NEC MultiSync SC40 User Manual page 14

Installation
2) Ventilation Requirements
When mounting in an enclosure or in a recessed area,
leave space between surrounding the monitor and
surrounding objects to allow heat to disperse, as shown
in Figure 3.
3) Main Power Switch Cover
The Main Switch Cover will be attached in one of two
ways, depending on the orientation of the monitor.
When the Main Switch Cover is used when a Tabletop
Stand (optional) is attached, the longer side of the cover
will go underneath. When used without a stand, the
short side of the cover will go underneath (Figure 4).
4) Prevent Tipping
When using the display with the optional Tabletop
Stand fasten the LCD to a wall using a cord or chain
that can support the weight of the monitor (SC40
approx. 32.6kg; SC46 approx. 39.3kg) in order to
prevent the monitor from falling. Fasten the cord or
chain to the monitor using the provided clamp and
screw (Figure 5).
Before attaching the LCD monitor to the wall, make
sure that the wall can support the weight of the
monitor.
Be sure to remove the cord or chain from the wall
before moving the LCD.
- continued
Figure 3
Figure 4
Main switch cover
(with optional stand)
The longer side of the
cover is toward the
bottom of the display.
Screw Holes
250mm
Figure 5
Clamp
English-8
Main switch cover
(without optional stand)
The shorter side of the
cover is toward the bottom
of the display.
Cord or Chain
Screw