Showing The Information Osd; Switching Between Picture Modes - NEC MultiSync ME501 User Manual

Showing the Information OSD

The Information OSD provides information such as: Input Source, Picture Size, IP Address, Monitor ID, etc.
Press the DISPLAY button on the remote control to bring up the Information OSD.


NOTEN: When the input signal is [Media Player], the information OSD will not be displayed.

Switching Between Picture Modes

Press the PICTURE MODE button on the wireless remote control to cycle through the picture modes [NATIVE], [RETAIL],
[CONFERENCING], [HIGHBRIGHT], [TRANSPORTATION] and [CUSTOM].
The picture modes are pre-configured with settings for general use. See
changing the picture mode settings.
Input name
A
DP
3840 x 2160
B Input Signal Information
HDR Information
C
Communication Info*
D
* Shows when [COMMUNICATION INFO] is [ON].
H
Green: Connected LAN
Red: Not connected LAN
"Using Picture Modes" on page 45
English−36
for instructions on