Table of Contents
Advertisement
Server Installation
Installation Process
Part A: Connecting the CallFinder to Power Outlets,
Phone Lines, and Ethernet
Summary: Place the CallFinder in a convenient location, and then
connect it to your AC power outlets and Ethernet. Before connecting
the extension lines, you need to know whether the CallFinder's ports
will function as FXO or FXS. The CallFinder's default extension
interface setting is FXO to prevent damage from a mistaken
connection. Be aware that an incorrect connection could damage
the CallFinder unit or the PBX. Do not connect FXS to FXS.
1. Connect CallFinder 5Vdc Power Supply to AC Outlet
Make sure the power switch is OFF. Plug the DC power transformer
for the 5 Vdc power supply into a power outlet or power strip. Plug
the other end into the "Power 5Vdc" jack on your CallFinder. The DC
power transformer is included with your CallFinder.
Caution: Use only the 5 Vdc power transformer supplied
with the CallFinder. Use of any other transformer
voids the warranty and can damage the
CallFinder. The CallFinder's 5Vdc and 48 Vdc
power supplies have different connector types to
prevent mix-ups.
2. Connect CallFinder 48Vdc Power Supply to AC Outlet
Make sure the power switch is OFF. Plug the DC power transformer
for the 48 Vdc power supply into a power outlet or power strip. Plug
the other end into the "Power 48 Vdc" jack on your CallFinder. The
DC power transformer is included with your CallFinder.
Caution: Use only the 48 Vdc power transformer supplied
with the CallFinder. Use of any other transformer
voids the warranty and can damage the
CallFinder. The CallFinder's 5Vdc and 48 Vdc
power supplies have different connector types to
prevent mix-ups.
Multi-Tech CallFinder Quick Start
8
Advertisement
Table of Contents
