Table of Contents
Advertisement
Installation and Cabling
Attaching the MultiConnect Adapter to a Fixed Location
1.
Typically, the MultiConnect is mounted against a flat
surface with two mounting screws. Drill the mounting
holes at the desired mounting location. The mounting
holes must be separated by 4-15/16 inches center-to-
center.
2.
To attach the mounting bracket, slide it into the
corresponding slot on the back of the MultiConnect
chassis.
3.
Attach the adapter to the surface with two screws.
Serial-to-Bluetooth Adapter
5
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiConnect BT MTS2BTA and is the answer not in the manual?
Questions and answers