Resetting Admin Pc To Its Regular Ip Address; Logging In (Ii) - Multitech CF220-DID Quick Start Manual

Did adapter

Hide thumbs Also See for CF220-DID:

Table of Contents

Multi-Tech CallFinder Quick Start

4. Resetting Admin PC to Its Regular IP Address

In step #1 above, you recorded the original IP address of the

administrator's PC and then reset it to the IP address required to

allow communication with the CallFinder unit. You must now set the

IP address of the administrator's PC to a value that allows you to

reach CallFinder at its new IP address.

Having reset the IP address of the administrator's PC, you must log

into the CallFinder software again. Go to the Login screen, enter

admin as User Name and admin as Password.

Note: If you changed the IP address of your PC to

accommodate the CallFinder, a slight complication will

occur when you try to login to the CallFinder at this

point. At the Login screen, after entering your

username and password, you will be prompted to log

another user out. Select "Yes." (Clicking

the logged-in status you had earlier when your PC was

at its previous IP address.)

Server Installation

Yes

cancels

Table of Contents