Configuring The Callfinder's Channels - Multitech CF220-DID Quick Start Manual

Multi-Tech CallFinder Quick Start

8. Configuring the CallFinder's Channels

The CallFinder's DID Modems (channels) direct inbound calls to
their proper destination.
a. In the CallFinder software, go to the Channel Configuration
screen.
b. Under Channel Configuration: Channel 1, enter the values that
match the characteristics of your DID phone line in the fields
provided. Three parameters relate to the DID line coming into
the CallFinder channel. Four parameters relate to the PBX
extension line to which the CallFinder channel connects.
DID Line Parameters
Consult the telco supplying the DID line about these
parameters. See the section "Prerequisite: Ordering the DID
Line" on page 7.
Max DID Digits
receive from the telco central office on the DID line.
: wink, immediate, or delay dial.
DID Start
Server Installation
: the number of digits the CallFinder will
17