Memorising 3-Button Remote Controls (Telis Io, Telis Composio Io, Etc.) - SOMFY CONTROL BOX 3S io Installation Instructions Manual

Control Box 3S io
Copying individual buttons on the Keytis io remote control
Ensure that the new remote control has memorised the system key.
[1]. Press the "PROG" button on the memorised remote control until the green indicator light comes on (2 s).
[2].
[3]. PROG" button on the new remote control.
[4].
Remote control memorised
It is not possible to memorise Keytis io remote controls in the following cases:
. The remote control has not memorised the system key.
. Several of the installation's receivers are in programming mode.
. Several remote controls are in key transfer or memorisation mode.
control.

Memorising 3-button remote controls (Telis io, Telis Composio io, etc.)

Button functions on a 3-button remote control
F0 Complete opening
F1 Complete opening
F2 Lighting ON
F3 Aux. output ON
Memorising via the programming interface
To memorise a 3-button io bidirectional remote control (Telis io, Impresario Chronis io, etc.), ensure that the remote control has memorised the system
key (see page 16).
[1]. Press and hold the "PROG" button (2 s) on the programming interface.
The screen displays "F0".
Note: pressing "PROG" again allows the next function to be memorised.
[2]. Press "PROG" at the rear of the 3-button remote control to memorise the
function.
The screen displays "Add".
Memorising by copying a previously memorised 3-button io remote control
Copyright © 2015 Somfy SAS. All rights reserved
my
Stop Complete closing
Stop Complete closing
Lighting OFF
Aux. output OFF
2 s
Remote control memorised
Remote control to be memorised
C1 F0
2 s
Remote control to be memorised
- - - C1
18