Monitor Mount - Stand & Wall Mount; Counter / Table - Vertical; Counter / Table - Picture Frame; Stand Mount - Flexible Viewing Angles - Lorex SHS-2S7LD Series Instruction Manual

Monitor Mount - Stand & Wall Mount
This system has a variety of Mounting Options. It can be placed on a Table or Countertop, can be
attached to a stand or wall mounted.

Counter / Table - Vertical

• Place the System in the desired viewing location. The system
is designed to remain balanced when placed on any flat
surface.

Counter / Table - Picture Frame

• The built-in stand is designed to flip out providing
a Picture Frame look and feel for the System.

Stand Mount - Flexible Viewing Angles

• Screw the stand into the bottom of the System.
• Loosen the thumbscrew to adjust the angle of the monitor.
• Tighten the thumbscrew once the desired angle is set.
• The Stand can be screwed into a surface for added stability,
or glued using the included peel-off adhesive.

Wall Mount:

• Use 4 screws to securely attach the Wall Mount Bracket
to a wall.
• Make sure the 'L' part of the Bracket is at the bottom.
• Slide the Monitor onto the Bracket.
Monitor Mount - Stand & Wall Mount
11