Remote Control - Lorex LIVE LW2710 Series Instruction Manual

Getting Started

Remote Control

1 / /

1 : Move menu cursor UP;
change time settings; start/pause
playback; jump to camera 1 while in
Quad Mode.
2 Enter: Confirm menu selections.

3 4/ : Move menu cursor LEFT;
rewind playback; jump to camera 4
while in Quad Mode; decrease
4 MENU / Back: Press to open the
Main Menu; close menu windows.
5 Record: Press Motion to enable
motion recording - system will
ONLY record when motion is

detected; press
manual recording.
6 Volume: Increase/decrease volume
of two-way audio from the receiver;
increase/decrease volume during
playback.
7 Quad: Press to change the display view to quad (4-way) split-screen.
 
8 2/ : Move menu cursor RIGHT; increase playback speed; jump to camera 2 while in Quad
Mode; increase values in certain menu options.
9 3/: Move menu cursor DOWN; change time settings; stop playback; jump to camera 3 while
in Quad Mode.
10 Scan/Del: Press to enable/disable Screen Saver mode; delete recorded video files.
11 Channel: Press "A" to enable/disable automatic sequence; press M to manually change the
channels (1~4).
12 AV: Press to send the image to a connected TV or monitor (AV cable required)
NOTE: Screen Saver Mode is not available if using AV-out.
4
1
2
3
4
to start/stop
5
6
7
8
9
10
11
12