Regular Maintenance; North American Emissions Compliance - Distech Controls ECLYPSE ECY-400 Series Installation Manual

Hide thumbs

Table Of Contents

M-Bus Meters

12000 m (39370 ft)

Table 1: Maximum Wiring Length from the Controller to the Last M-Bus Meter on USB connection

Maintenance

Turn off power before any kind of servicing.

Regular Maintenance

Each controller requires minimal maintenance, but it is important to take note of the following:

Clean the outside of the controller by polishing it with a soft dry cloth.

Using a torque limited screw driver set to 0.4 Nm (3.54 in-lb), retighten terminal connector screws annually to ensure the wires remain securely at-

tached.

Disposal

The Waste Electrical and Electronic Equipment (WEEE) Directive sets out regulations for the recycling and disposal of products. The WEEE2002/96/EG

Directive applies to standalone products, for example, products that can function entirely on their own and are not a part of another system or piece of

equipment.

For this reason Distech Controls products are exempt from the WEEE Directive. Nevertheless, Distech Controls products are marked with the WEEE

symbol

, indicating devices are not to be thrown away in municipal waste.

Products must be disposed of at the end of their useful life according to local regulations and the WEEE Directive.

North American Emissions Compliance

United States

Changes or modifications not expressly approved by Distech Controls could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential and commercial installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Canada

This Class (B) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la Classe (B) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

ECLYPSE, Distech Controls, the Distech Controls logo, EC-Net, Allure, and Allure UNITOUCH are trademarks of Distech Controls Inc. BACnet is a registered trademark of ASHRAE; BTL is a registered

trademark of the BACnet Manufacturers Association. The Bluetooth

Global Head Office - 4205 place de Java, Brossard, QC, Canada, J4Y 0C4 - EU Head Office - ZAC de Sacuny, 558 avenue Marcel Mérieux, 69530 Brignais, France

15 / 15

AWG 15

300 Bps

2400 Bps

4500 m (14763 ft)

Specifications subject to change without notice.

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. All other

trademarks are property of their respective owners.

9600 Bps

300 Bps

2400 m (7874 ft)

4000 m (13123 ft)