Chapter 8—Maintaining the Printer
External Cleaning
Always unplug the power cord before cleaning the printer.
If using the printer in an industrial environment, where
the premises may be cleaned using a water hose or steam,
move the printer to another room or cover it carefully with
a plastic sheet and make absolutely sure that the power cord
is unplugged.
Clean the external surfaces using a soft cloth, possibly slightly moisten
with water or a mild detergent.
Stuck labels should be peeled away using your fingers only. If necessary,
dissolve the adhesive using isopropyl alcohol first.
Isopropyl alcohol [(CH
flammable, moderately toxic, and mildly irritating sub-
stance.
54
)
CHOH; CAS 67-63-0] is a highly
3
2
Intermec EasyCoder PD4—User's Guide