Warranty - Alpha Moisture Systems SADPmini Instruction Manual

Warranty

Alpha Moisture Systems Ltd. (AMS) warrants the products it manufactures, or
distributes, to be free of defects in material and workmanship under normal use
and service when operated within the specified design limitations for a period of
24 months from date of initial shipment.
Under this Warranty, AMS will, at its discretion, repair or replace any
component that upon examination by AMS or its duly authorized
representatives proves to be defective during the warranty period, provided the
system is returned to the factory for inspection and repair shipping prepaid.
Improper or unauthorized maintenance, storage, repair, or alteration of any
kind by personnel other than AMS, or its duly authorized representatives, may
void all warranties. Warranty may also be voided for misuse, neglect, accident,
corrosion, and improper installation.
This Warranty is exclusive and in lieu of any and all other warranties of
merchantability, fitness for a particular purpose, or any other warranty,
expressed or implied, and all other liabilities and obligations on the part of AMS.
AMS will not be liable for any other claims or damages, either direct, indirect, or
consequential arising out of the use of its products.
Original manuals are prepared in English. Translations in other languages may
be available, but in the event of any discrepancy, the English version will be
considered as the official version, which is subject to change without notice.
NOTE: Corrosive Gases: The Sensor should not be exposed to corrosive gases
(or corrosive contaminants in the gas sample) as these can chemically attack
the sensor, impairing calibration accuracy and/or damaging it beyond economic
repair. Examples of such gases are mercury (Hg), ammonia (NH ), chlorine (Cl )
3 2
etc. Strong oxidising agents such as ozone (O ) should also be prevented from
3
coming into contact with the sensor.
Page ii