SMC Networks IZS51 Series Operation Manual page 9

Caution
1) Do not apply excessive external force or shock (100m/s
· Even if the there are no problems with the appearance of the Ionizer, the damage of the internal
components may cause malfunction.
·
2) Hold the ends and the middle of the product so that moment load is not applied.
· Handling the product by holding either end of the product may cause deformation or damage to the product.
3) Power cable must be connected and disconnected by hand.
· Open and close too much may damage the drain cock.
· To remove the connector, loosen the lock nut by hand and pull it straight out.
4) If smoking, fire or smell occurs in the product, immediately shut off the power supply.
5) In model with valve unit on both side of this product, must be supplied air from piping ports on both
sides.
· Plugs one side, may cause malfunction or damage to the product.
Handling
or more) to the product.
2
9