Rexing M2 MAX PRO Quick Start Manual page 4

Notice
1. The user menu is to be set up in non-video mode. If the device is in video
mode, please proceed only after stopping the video recording.
2. Memory Card: Using a new MicroSD card always requires formatting it to
your device. Regularly clear the memory card, as continuous video
recording for an extended period of time may produce some protected
files that are not subject to long-term protection (these files may not be
overwritten during loop recording) and some storage fragments, which
must be cleared regularly in order to save usable storage space.
3. Time-lapse photography should not be enabled while driving. This
function captures images more slowly than normal but plays in speed-up
mode, which may affect the integrity and continuity of your video.
On-board Charger: The standard input voltage is configured to 12V. If a
4.
voltage greater than 12V, contact store of purchase or our customer
care via care@rexingusa.com to replace it with a replacement charger.
The features described in this operation manual are available for all
5.
products of the same type. The device you buy may be a model with
optional or additional functions. Menu operations may vary. Please refer
to your actual product.
6. Pay attention to the mounting position, which must not interfere with
driving or lead to unsafe driving operation. Make sure it is safely secured.
A standard 6-meter cable is provided for the rearview camera. It is not
7.
recommended to install this type of dash cam if your car is larger than
the connection cable range.
3