Rexing M2 MAX PRO Quick Start Manual page 16

Outline
RCW refers to Rear-End Collision Warning. This warning system will trigger an
alert when an object or vehicle is detected by the rear camera.
ADAS, or Advanced Driver Assistance Systems, enhance vehicle safety and
support the driver during operation. Key features include forward collision
and lane departure warnings.
refers to Blind Spot Detection, which monitors in real time any vehicle in
BSD
the blind spots on both sides during driving. It gives an alert so as to reduce
the risk of traffic accidents that are likely to occur when you intend to shift to
another lane. It is also called
and systems may be interfered with by sunlight, inadequate lane
RCW BSD
lines, rain, and fog, Certain impacts may be affected by these inaccuracies,
and some collisions may not be avoidable. Currently, the
rate of accuracy between 80 to 90 percent during the daytime and 60 to 70
percent at night.
the daytime and around 80 percent at night.
Disclaimer:
The system is a safe driving assistant system and it cannot be used as a proof
for the liability of traffic accidents.
ADAS / RCW / BSD Calibration
The Rexing M2 Pro MAX is equipped with an auto-calibration feature that
activates during the first few minutes of driving, optimizing device
performance.
(Lane Change Assist).
LCA
provides a rate of accuracy around 90 percent during
BSD
15
provides a
RCW