Rexing M2 MAX PRO Quick Start Manual page 19

•
Rear camera direction
Normal, Flip, Mirror, Flip+Mirror
•
Time Stamp
Off, On
•
HDR (High dynamic range)
Off, On
•
Parking Monitor (On, Off)
This feature is on when you see the illuminated
on the video recording interface, and it is off when you see the
grayed-out
state will be activated after the engine is turned off. When the car is
shocked by an external force and the sensor detects the impact, the
system will begin video recording (Intelligent hardwire kit required).
The characteristics and precautions of the parking monitor are as
the follows:
With the use of the smart hardwire kit (sold separately). After the car
1.
engine is turned off, the smart hardwire kit detects the power loss and
sends a command to the host device. The system enters a standby state.
The Type C plug must always be kept connected to the USB port of the
device so as to ensure a constant power supply to the smart hardwire kit.
In parking mode, the dash cam will turn on, record a 15s video, lock the
2.
video, and then turn off again. When a recording is started, the screen
does not light up and there is no booting sound.
icon. When the parking monitor is activated, its standby
18
icon in the status bar