Content may differ from the final product or from software provided by service providers and is subject to change without prior notice. • For the latest version of this manual, refer to the Rexing /rexingusa website at www.rexingusa.com. •...
Table of Contents page page About This Manual 5. Mode Setup Table of Contents Video Mode Settings 1. What’s in the box? System Settings Photo Settings 2. Camera Overview 6. Troubleshooting Device Layout Buttons Update Firmware Status Icons 7. Product Specifications 3.
For more information about available accessories, refer to www.rexingusa.com. Quick Start Guide Safety Guide USB Cable 3M Adhesive Mount Cable Adhesive Spacer Cable Management Tool Rexing V3 Dashboard Camera Car Power Connector (12ft)
2. Camera Overview Buttons Device Layout Button Function Front Press: Toggle display on or off Hold: Turn the device on or off manually Menus: Confirm a selection Video Mode: Manually lock current recording Photo Mode: Take photo Playback Mode: Start / stop playback Video Mode: Start/stop recording: 4.
Status Icons Memory Card (Inserted) Exposure Icon Indication Video Resolution GPS Signal Acquired Currently Recording (Blinking) GPS Searching for Signal Wide Dynamic Range Enabled Current Recording Locked Connected to Power Source IT Lights Auto Audio Recording Enabled G-Sensor Level Audio Recording Disabled Video Recording Mode Playback Mode Photo Mode...
Connect the Plug Mini-USB power cable to connector to the The V3 accepts Micro SD memory cards (class 10 or higher) with the dash cam dash cam a maximum capacity of 256GB. Depending on the memory card manufacturer and type, some cards may not be compatible with your device.
Step 3: Formating a Memory Card Step 3.1: Powering the Camera You must always connect the V3 to a power source while operating the camera. Connect the camera to your vehicle via the included car charger cable. Connect the larger end of the car charger cable to your car’s cigarette lighter (12V DC power...
DC outlet Run the cable down from your camera to the 12V cigarette lighter port of your vehicle. Be sure to connect only Rexing- approved chargers designed and supplied specifically for use with your device. Using an incompatible charger can cause serious personal injury or damage to your device.
The camera automatically starts recording when it is powered on onscreen. The V3 will switch on or off automatically if you keep it connected using the car charger. The camera will automatically start recording when it is powered on. After power is diconnected, the device will shut down after 3 seconds.
also lock videos after recording by using the Protect function in 4.2.1 Camera Playback Mode the Playback Menu. Locked videos can be found on the memory card under “\CARDV\MOVIE\RO”. To play recordings on your device: Automatic Shutdown Switch to Playback Mode by holding the MENU button. Use the UP and DOWN buttons to browse your videos.
When prompted with “Erase All Recordings?” press the Connect your camera to your computer using the provided USB DOWN button to scroll down to “OK” and press OK to cable and select “Mass Storage” to access your card storage. delete all recordings. Your videos will be stored under “\CARDV\MOVIE”.
Google Maps to Baidu Maps. the camera view and display a “Wi-Fi Connected” message. Using the Rexing Connect app, you can view a live preview of the dash cam screen, start / stop recording, as well as view and save...
your captures with your mobile device. 128GB 14 hours 20 hours To exit Wi-Fi feature, hold the UP button to return to Video 256GB 28 hours 40 hours Recording Mode. Note: Choosing a single-channel resolution such as UHD, QHD, etc. For further instruction regarding the Wi-Fi Connect feature, will disable recording with the rear camera.
Page 15
Exposure Gravity Sensing Default setting: +0.0 Default setting: Low Manually adjust the camera’s If a change in gravitational exposure value to brighten or forces is detected, such as darken recordings. Positive in the event of a vehicular values brighten recordings accident, the G-sensor will while negative values darken signal to the camera, and an...
Page 16
When your car begins to move passenger cabin is dark. out of its lane or too close to the car in front of you, Rexing Daylight Savings dash cam will sound a voice alarm to warn you of the Default setting: Off driving safety.
Time Lapse • UP / DOWN – Change current value • OK – Move to next value After the car is turned off, the dash cam will perform as usual, • MENU – Confirm setting but the camera will capture videos and frames re-specified intervals of time and condense them into a video time lapse, Auto Power Off which means your footage appears to be faster upon playback.
Screen Saver Version Default setting: Off Displays the current device firmware information. Specifies duration which the display will stay on after the device is powered on. Having this setting disabled Photo Settings (default) will keep the display on constantly. You can press These settings affect your still photo captures.
Page 19
Quality Default setting: Normal Default setting: Auto Set the quality level of captured Adjust the camera’s sensitivity images. Lower quality images to light when taking photos. will take up less space on the The higher the ISO, the better memory card, but they are the camera operates in low more visually compressed than light, although images are...
Quick Review Watch out video tutorial on Default setting: Off https://youtu.be/0hRcKo0Bmko Upon capturing an image, the image will be previewed on the display for a few seconds before returning to Photo Mode. To update your camera’s firmware: Date Stamp Format the memory card using the Format function (See Page 16).
7. Product Specifications Loop Recording 1 min / 2 mins / 3 mins / Off Screen Saver 15 secs / 1 min / 3 mins Audio Recording On / Off Front - Sony Starvis, Image Sensor GPS Logger Built-in Cabin - OV2053 Wi-Fi Built-in Fixed-focus with full-glass...
8. Warranty & Support Warranty The Rexing V3 Dash Cam comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at...
Need help?
Do you have a question about the V3 and is the answer not in the manual?
Questions and answers