Advertisement
When connecting the charger to the vehicle's 12V DC outlet, be sure to
6.
use only a Rexing-approved charger. The charger should be at least a
2.5A charger which is designed and supplied specifically for use with your
device. Using an incompatible charger can cause serious personal injury
or damage to your device.
Note:
Due to unstable voltages caused by starting the car engine, a voltage
fluctuation in some vehicles may be especially obvious. If a flashing screen
or some other unforeseeable operating problem occurs when you start the
engine, it is recommended to unplug the device from the charger before
starting the engine, and then reconnect it after the engine is running.
Note:
•
Press the Power Button to turn On or Off the screen
•
Press and hold the Power Button for 3 seconds to turn the device on or off
We kindly suggest taking a moment to watch our tutorial
video. It's designed to help you have a smooth and
successful installation experience. We believe you'll find
it very helpful!
Please scan QR code
or go to shop.rexingusa.com > Buyer's Guide > How to
Install a Dash Cam
12
Advertisement
Need help?
Do you have a question about the M2 MAX PRO and is the answer not in the manual?
Questions and answers
How to adjust contrast on rear camera. Images are very light and hard to see