Setting Of Pre-Pick Mode - Fujitsu FI-5650C Operator's Manual

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color

7.5 Setting of pre-pick mode

7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
7.5 Setting of pre-pick mode
The settings of the pre-pick mode are as follows.
1. Select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel].
2. Click [Device Setting 2] tab, and select [Pre-Pick] from [Preferences].
Yes : The setting prioritizes for the processing speed. The next document will be fed to the pick roller automatically.
No : The next document won't be fed to the pick roller automatically.
ATTENTION
FUJITSU TWAIN32 Scanner driver selection has precedence over this setting.
All Rights Reserved, Copyright (C) PFU LIMITED 2004