Fujitsu FI-5650C Operator's Manual page 94

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
4.1 Cleaning material and locations requiring cleaning (Continued from the previous page)
2. Locations requiring cleaning
Part Names of parts Using cleaning paper with Cleaner F1
per 10,000 scans
ADF Chute roller
Pick arm
Pick roller Yes
Brake roller Yes
Feed roller Yes
Plastic roller Yes
Sheet guide
Glass
Ultrasonic sensor
You have to clean the scanner frequently as following cases :
Scan a smooth surface document such as a coated paper.
Scan a printed document almost fill in the paper.
Scan a processed with chemicals document such as carbonless paper.
Scan a document having a high calcium content.
Scan a lot of penciled document.
CAUTION
Do not clean rubber rollers with Cleaner F2.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
Using Cloth with Cleaner F1 Using Cotton swab with Cleaner F2
per 10,000 scans When stains are persistent
Yes
Yes
Yes
Yes
Yes
Yes Yes
Yes
Yes
Clean this part with a dry lint-free
cloth.
1 | 2