Download Print this page

Fujitsu FI-5650C Operator's Manual

Image scanner
Hide thumbs

Advertisement

CONTENTS
fi-5650C Image Scanner Operator's Guide
P3PC-E957-01EN
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2004

Advertisement

loading

  Related Manuals for Fujitsu FI-5650C

  Summary of Contents for Fujitsu FI-5650C

  • Page 1 CONTENTS fi-5650C Image Scanner Operator's Guide P3PC-E957-01EN Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF...
  • Page 2: Table Of Contents

    CONTENTS Introduction Introduction Thank you for purchasing the fi-5650C fi-5650C duplex color scanner product. Regulatory Information The fi-5650C is a high-performance duplex color scanner product, equipped with ADF (Automatic Document Feeder) for automatically Trademarks scanning documents. Note, Liability Features: Preface Basic High Resolution: 600 dpi.
  • Page 3: Names And Functions Of Parts

    CONTENTS MAP Introduction Regulatory Information Trademarks Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 1.2 Functions of the operator 1.1 Names and functions of parts panel 2 BASIC SCANNER OPERATION 2.2 Loading documents onto the 2.4 How to use the Scanner 2.1 Turning the scanner ON/OFF 2.3 Scanning documents Driver...
  • Page 4: Basic Scanner Operation

    CONTENTS Regulatory Information Introduction FCC declaration Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These Trademarks limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, Note, Liability and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
  • Page 5: Scanning Various Types Of Documents

    1 NAMES AND FUNCTIONS OF PARTS Hiermit wird bescheinigt, daß der/die/das 2 BASIC SCANNER OPERATION fi-5650C 3 SCANNING VARIOUS TYPES OF DOCUMENTS In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört ist. Laut Maschinenlärminformationsverordnung 3. GS GV, 18.01.1991:Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß...
  • Page 6: Daily Care

    CONTENTS Regulatory Information (Continued from the previous page) Introduction International ENERGY STAR® Program Regulatory Information As an ENERGY STAR® Partner, PFU LIMITED has determined that this product meets the ENERGY STAR® guidelines for energy Trademarks efficiency. Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS The International ENERGY STAR®...
  • Page 7: Replacing Consumables

    CONTENTS Regulatory Information (Continued from the previous page) Introduction Use in High-safety Applications Regulatory Information This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and Trademarks general-purpose applications. It has not been designed and manufactured for use in applications (simply called "high-safety applications" Note, Liability from here on) that directly involve danger to life and health when a high degree of safety is required, for example, in the control of nuclear reactions at nuclear power facilities, automatic flight control of aircraft, air traffic control, operation control in mass-transport systems, medical...
  • Page 8: Troubleshooting

    CONTENTS Trademarks Introduction Use in High-safety Applications Regulatory Information Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. Trademarks Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems Incorporated in the United States and/or other Note, Liability countries.
  • Page 9: Online Setup

    CONTENTS Trademarks (Continued from the previous page) Introduction Manufacturer Regulatory Information PFU LIMITED Trademarks Note, Liability International Sales Dept., Imaging Business Division, Products Group Preface Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan Safety Precautions Phone : (81) 44-540-4538 1 NAMES AND FUNCTIONS OF PARTS All Rights Reserved, Copyright©...
  • Page 10: Document Specification Of Adf

    CONTENTS Note, Liability Introduction READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF THIS PRODUCT IS NOT USED CORRECTLY, Regulatory Information UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS. Trademarks While all efforts have been made to ensure the accuracy of all information in this manual, PFU assumes no liability to any party for any Note, Liability damage caused by errors or omissions or by statements of any kind in this manual, its updates or supplements, whether such errors are omissions or statements resulting from negligence, accidents, or any other cause.
  • Page 11: Options

    CONTENTS Preface Introduction Safety Precautions Regulatory Information This manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manual before you start to Trademarks use this product. In particular, be sure to read and fully understand the Safety Precautions described in this manual before you use this Note, Liability product.
  • Page 12: Scanner Specifications

    CONTENTS Preface (Continued from the previous page) Introduction Symbols Used In This Manual Regulatory Information This manual uses the following symbols in explanations in addition to warning indications. Trademarks Note, Liability ATTENTION Preface This symbol alerts operators to particularly important information. Be sure to read this information. Safety Precautions HINT 1 NAMES AND FUNCTIONS OF PARTS...
  • Page 13 About Maintenance The user must not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this product. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 14: Safety Precautions

    CONTENTS Safety Precautions Introduction Regulatory Information WARNING Trademarks The following describes important warnings described in this manual. Note, Liability Do not touch the AC cable with wet hands. Preface Safety Precautions Do not touch the power plug with wet hands. Doing so might cause electric shock. 1 NAMES AND FUNCTIONS OF PARTS Do not damage the AC cable.
  • Page 15 3 SCANNING VARIOUS TYPES OF DOCUMENTS and then disconnect its power plug. Make sure that the smoking has stopped, and then contact the store where you bought the scanner or an authorized FUJITSU scanner service provider. 4 DAILY CARE Turn the scanner OFF if it is damaged.
  • Page 16 CONTENTS Safety Precautions (Continued from the previous page) Introduction Regulatory Information CAUTION Trademarks The following describes important cautions described in this manual. Note, Liability Do not install the scanner on unstable surfaces. Preface Safety Precautions Install the scanner on a desk so that none of its parts protrude outside of the desktop. Also, make sure that the scanner is installed on a flat, level surface.
  • Page 17 CONTENTS Safety Precautions (Continued from the previous page) Introduction Regulatory Information CAUTION Trademarks The following describes important cautions described in this manual. Note, Liability Protect the scanner from static electricity. Preface Safety Precautions Install the scanner away from strong magnetic fields and other sources of electronic noise. Also, protect the scanner from static electricity as this might cause the scanner to malfunction.
  • Page 18 CONTENTS Safety Precautions (Continued from the previous page) Introduction Regulatory Information CAUTION Trademarks The following describes important cautions described in this manual. Note, Liability Do not try to move or lift the scanner alone. Preface Safety Precautions This scanner is heavy (43.5 lbs / 20kg). When you carry the scanner, ensure that additional personnel are used. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS...
  • Page 19 CONTENTS Chapter 1 NAMES AND FUNCTIONS OF PARTS Introduction This chapter describes names and functions of parts. 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING...
  • Page 20 CONTENTS 1.1 Names and functions of parts (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING...
  • Page 21 CONTENTS 1.1 Names and functions of parts (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING...
  • Page 22 CONTENTS 1.1 Names and functions of parts (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING...
  • Page 23 CONTENTS 1.2 Functions of the operator panel Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF...
  • Page 24 CONTENTS Chapter 2 BASIC SCANNER OPERATION Introduction This chapter describes how to scan various types of documents. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE...
  • Page 25: Turning The Scanner On/Off

    CONTENTS 2.1 Turning the scanner ON/OFF Introduction When "|" of the power switch is pressed, the scanner is turned ON, and the green LED on the operator panel lights. During the initialization, 1 NAMES AND FUNCTIONS OF PARTS the indication of the Function No. display changes as follows: "8"...
  • Page 26 CONTENTS 2.1 Turning the scanner ON/OFF (Continued from the previous page) Introduction Power Save Mode 1 NAMES AND FUNCTIONS OF PARTS The Power Saving Mode is designed to reduce the scanner's power consumption when not in use while switched on. 2 BASIC SCANNER OPERATION The scanner will switch automatically to power saving mode at preset intervals if idle and remain in a state of low power.
  • Page 27 CONTENTS 2.2 Loading documents onto the ADF Introduction 1. Confirm the following items before loading documents 1 NAMES AND FUNCTIONS OF PARTS All the documents have the same width Check the number of sheets in the document stack. 2 BASIC SCANNER OPERATION The standard of number of sheets that can be loaded on the scanner is as follows: 2.1 Turning the scanner ON/OFF A4-size paper or smaller:...
  • Page 28 CONTENTS 2.2 Loading documents onto the ADF (Continued from the previous page) Introduction 2. Fan the documents 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE...
  • Page 29 CONTENTS 2.2 Loading documents onto the ADF (Continued from the previous page) Introduction 3. Load the documents onto the ADF paper chute. 1 NAMES AND FUNCTIONS OF PARTS Pull out the ADF paper chute extension according to the length of the document. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF...
  • Page 30 CONTENTS 2.2 Loading documents onto the ADF (Continued from the previous page) Introduction 4. Adjust the side guides to the width of the documents. 1 NAMES AND FUNCTIONS OF PARTS Move the side guides so that they contact both sides of the documents. If there is any space between the side guides and the edges of documents, the scanned image may be skewed.
  • Page 31 CONTENTS 2.2 Loading documents onto the ADF (Continued from the previous page) Introduction 5. Adjust the stacker extension according to the document size and raise the stopper. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver...
  • Page 32 CONTENTS 2.2 Loading documents onto the ADF (Continued from the previous page) Introduction With the movie below, review how to load the document onto the ADF: 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver...
  • Page 33: Scanning Documents

    The [Select Source] dialog box appears. Appendix 4. Select"FUJITSU fi-5650Cdj"(for Windows 95 and WindowsNT 4.0, select "FUJITSU TWAIN 32") and click the [Select] button. HINT The scanning procedure described in this section were explained by using the scanner driver application software, Fujitsu TWAIN, provided with this product.
  • Page 34 CONTENTS 2.3 Scanning documents (Continued from the previous page) Introduction 5. Click the [Scan To View] button on the tool bar. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents The [TWAIN Driver] dialog box (for setting the scan conditions) appears.
  • Page 35 CONTENTS 2.3 Scanning documents (Continued from the previous page) Introduction The images of scanned documents are displayed on the [ScandAll 21] window. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS...
  • Page 36 2.4.1 FUJITSU TWAIN32 Scanner Driver 1 NAMES AND FUNCTIONS OF PARTS FUJITSU TWAIN32 Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software 2 BASIC SCANNER OPERATION that complies with the TWAIN standard.
  • Page 37 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Procedure for Basic Scanning Operation 1 NAMES AND FUNCTIONS OF PARTS 1. Start up the application. 2 BASIC SCANNER OPERATION From the [Start] menu, select [Programs]-[Scanner Utility for Microsoft Window] and click [ScandAll 21]. 2.1 Turning the scanner ON/OFF 2.
  • Page 38 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES Select 6 TROUBLESHOOTING [FUJITSU fi-5650C] for FUJITSU TWAIN32 V9 7 ONLINE SETUP [FUJITSU TWAIN32] for FUJITSU TWAIN32 V8 8 DOCUMENT SPECIFICATION OF ADF then click the [Select] button.
  • Page 39 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction 4. Load the documents on the scanner. 1 NAMES AND FUNCTIONS OF PARTS For details on loading documents, refer to "2.2 Loading documents onto the ADF".
  • Page 40 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix For details about the settings on this window, refer to "Setting Window for FUJITSU TWAIN32 Scanner Driver". | 5 | 11···29 All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 41 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction The images of scanned documents are displayed on the [ScandAll 21] window. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver...
  • Page 42 You can perform settings for the FUJITSU TWAIN32 Scanner Driver on this window. The following describes the main setting items. For details on each functions, refer to "FUJITSU TWAIN32 Scanner Driver Help" (appears by clicking [Help] or pressing [F1] button). | 7 | 11···29...
  • Page 43 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Resolution 1 NAMES AND FUNCTIONS OF PARTS Specifies the resolution of scanning. 2 BASIC SCANNER OPERATION It can be specified by selecting a default value from the list or customizing (specify any resolution in 1 dpi unit). By marking the [Predefine] check box, you can select one from three predefined settings as [Normal], [Fine], [Super Fine] to scan documents 2.1 Turning the scanner ON/OFF instead of setting details by yourself.
  • Page 44 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Image Mode 1 NAMES AND FUNCTIONS OF PARTS Specifies the image type for the scanned documents. 2 BASIC SCANNER OPERATION Black & White 2.1 Turning the scanner ON/OFF Documents are scanned in binary (black and white).
  • Page 45 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction [Help] button 1 NAMES AND FUNCTIONS OF PARTS Opens the "FUJITSU TWAIN32 Scanner Driver Help" window. The window also opens by pushing the [F1] key. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF [About...] button 2.2 Loading documents onto the ADF...
  • Page 46 3 SCANNING VARIOUS TYPES OF DOCUMENTS [Generic] tab 4 DAILY CARE Select this tab to change the unit displayed on the Setting Window for the FUJITSU TWAIN32 Scanner Driver. (Millimeters, Inches, and Pixels are available) 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING...
  • Page 47 You can save the changed settings as a Setting File. From next scanning, the settings are quickly changed by using these Setting Files. 6 TROUBLESHOOTING 7 ONLINE SETUP HINT 8 DOCUMENT SPECIFICATION OF ADF For details of each function, refer to the "FUJITSU TWAIN32 Scanner Driver Help". 9 OPTIONS 1···10 | 12 | 21···29...
  • Page 48 2.4.2 FUJITSU ISIS Scanner Driver 1 NAMES AND FUNCTIONS OF PARTS FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that 2 BASIC SCANNER OPERATION complies with The ISIS standard. The following describes the procedure with examples of QuickScan for ordinary scanning by using this driver software.
  • Page 49 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction 3. Select [fi-5650C], then click the [OK] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents...
  • Page 50 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction 5. Choose the scanning profile that you wish to use. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver...
  • Page 51 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction 6. Select the [Scan] tab and click the [Scanner Settings] on the [Profile Editor] window. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents...
  • Page 52 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix HINT For details on this dialog box, refer to "Configuration Window of FUJITSU ISIS Scanner Driver". 1···10 | 17 | 21···29 All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 53 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction 8. The [Profile Editor] window appears. Click the [OK] button to return to [New batch] dialog. 1 NAMES AND FUNCTIONS OF PARTS HINT 2 BASIC SCANNER OPERATION Configure other settings of the profile, if necessary.
  • Page 54 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction 10. Click the [Scan] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS...
  • Page 55 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Configuration Window of FUJITSU ISIS Scanner Driver 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents...
  • Page 56 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Image Mode 1 NAMES AND FUNCTIONS OF PARTS Select a color mode suitable for the purpose from the menu. 2 BASIC SCANNER OPERATION Black & White 2.1 Turning the scanner ON/OFF Scans data in binary (black and white).
  • Page 57 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Half tone 1 NAMES AND FUNCTIONS OF PARTS Select the half tone pattern for half tone scanning. This setting is available when "Black & White" is selected in the "Image Mode". 2 BASIC SCANNER OPERATION Dither Pattern 0 2.1 Turning the scanner ON/OFF...
  • Page 58 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Scan Type 1 NAMES AND FUNCTIONS OF PARTS Selects the scanning method. 2 BASIC SCANNER OPERATION ADF (Front Side) 2.1 Turning the scanner ON/OFF Scans only the front sides of documents. 2.2 Loading documents onto the ADF ADF (Back Side) 2.3 Scanning documents...
  • Page 59 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Paper Size 1 NAMES AND FUNCTIONS OF PARTS Selects a paper size according to the size of the document to be scanned. Select a standard paper size from the list. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF Paper Layout...
  • Page 60 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction [Area...] button 1 NAMES AND FUNCTIONS OF PARTS Opens the Scan Area dialog box. 2 BASIC SCANNER OPERATION Specify scan area for the document size. The size can be set by dragging the frame with mouse.
  • Page 61 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction [Imprinter...] button 1 NAMES AND FUNCTIONS OF PARTS Opens the Imprinter Configuration dialog box. Used for setting the strings to be printed by the imprinter. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF...
  • Page 62 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction [Setup IPC...] button 1 NAMES AND FUNCTIONS OF PARTS This button displays the Image Processing dialog. This button is enabled when Image Processing Software Option (separately sold) is 2 BASIC SCANNER OPERATION installed and "Image Processing"...
  • Page 63 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Loading documents onto the ADF 2.3 Scanning documents 2.4 How to use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES...
  • Page 64 • CONTENTS 2.4 How to use the Scanner Driver (Continued from the previous page) Introduction Dropout Color 1 NAMES AND FUNCTIONS OF PARTS This option excludes selected color (the three primary colors of light i.e. green, red, blue) from scanned images. For example, if the document 2 BASIC SCANNER OPERATION contains black text in a red frame and when the red color is selected, the scanner reads only the text and eliminate (drop out) the red frame.
  • Page 65 CONTENTS Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS Introduction This chapter describes how to scan various types of documents with examples of TWAIN Driver. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size...
  • Page 66: Scanning Double Sided Documents

    8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS The [Select Source] dialog box appears. 4. Select"FUJITSU fi-5650Cdj"(for Windows 95 and WindowsNT 4.0, select "FUJITSU TWAIN 32") and click the [Select] button. 10 SCANNER SPECIFICATIONS Appendix All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 67 CONTENTS 3.1 Scanning double sided documents (Continued from the previous page) Introduction 5. Click [Scan To View] on the tool bar. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths The [TWAIN Driver] dialog box appears.
  • Page 68 CONTENTS 3.1 Scanning double sided documents (Continued from the previous page) Introduction 7. Click the [Scan] button. 1 NAMES AND FUNCTIONS OF PARTS Scanned images are displayed in ScandAll21 window. 2 BASIC SCANNER OPERATION HINT 3 SCANNING VARIOUS TYPES OF DOCUMENTS For details on ScandAll 21, refer to [ScandAll 21 Help].
  • Page 69 CONTENTS 3.2 Scanning documents with different widths Introduction When you scan a batch of documents with different widths by using the ADF, you may get skewed images from smaller sized documents. Be 1 NAMES AND FUNCTIONS OF PARTS sure to scan only documents of the same width together. To prevent skewed images, enable [Automatic Size and Skew Detection] function. For details on this function, refer to "3.8 Correcting skewed documents".
  • Page 70 CONTENTS 3.3 Scanning document longer than A3 size Introduction 1. Load the documents onto the ADF paper chute. 1 NAMES AND FUNCTIONS OF PARTS For details on loading documents, refer to Chapter "2.2 Loading documents onto the ADF". 2 BASIC SCANNER OPERATION 2.
  • Page 71 To save scanned images in PDF format, Adobe Acrobat 6.0 must be installed on your PC. 2 BASIC SCANNER OPERATION Install Adobe Acrobat 6.0 from the provided Adobe Acrobat CD-ROM. For details on installation, refer to fi-5650C Getting Started. 3 SCANNING VARIOUS TYPES OF DOCUMENTS There are two methods for saving scanned images in PDF format: 3.1 Scanning double sided documents...
  • Page 72 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 3.4.1 Using ScandAll 21 1 NAMES AND FUNCTIONS OF PARTS 1. Load the documents on the ADF paper chute. 2 BASIC SCANNER OPERATION 2. Start up ScandAll 21. 3 SCANNING VARIOUS TYPES OF DOCUMENTS Select [Program] - [ScannerUtility for Microsoft Windows] - [ScandAll21] from the [Start] menu.
  • Page 73 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 4. Set the scan resolution, paper size, etc., and then click the [Scan] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size...
  • Page 74 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 5. To end scanning, click the [Close] button. 1 NAMES AND FUNCTIONS OF PARTS The scanned image is displayed. 2 BASIC SCANNER OPERATION 6. Enter the file name and select the destination to save the scanned image. For details, refer to "ScandAll 21 Help".
  • Page 75 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 3.4.2 Using Adobe Acrobat 6.0 1 NAMES AND FUNCTIONS OF PARTS 1. Load the documents on the ADF paper chute. 2 BASIC SCANNER OPERATION 2. Start up Adobe Acrobat 6.0 3 SCANNING VARIOUS TYPES OF DOCUMENTS Select [Program] - [Adobe Acrobat 6.0] from the [Start] menu.
  • Page 76 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 4. Select [FUJITSU fi-5650Cdj] ([FUJITSU TWAIN 32] for WindowsNT 4.0) at [Device] and click the [Scan] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents...
  • Page 77 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 5. Select the scan resolution, document size, etc., and click the [Scan] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size...
  • Page 78 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 6. To end scanning, click the [Done] button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format...
  • Page 79 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 7. Select [Save as...] or [Save] from the [File] menu to save the scanned image. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size...
  • Page 80 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction HINT If you save scanned images by this procedure, the file size may increase greatly. For reducing the file size, follow the procedure below. 1 NAMES AND FUNCTIONS OF PARTS (It may take much more time than the usual saving procedure.) 2 BASIC SCANNER OPERATION 1.
  • Page 81 CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 3. Click the [Properties] button. 1 NAMES AND FUNCTIONS OF PARTS 4. Click the [Adobe PDF Settings] tab. 2 BASIC SCANNER OPERATION 5. From [Default Settings], select an option. Here, as an example, [Smallest file Size] is choosen. 3 SCANNING VARIOUS TYPES OF DOCUMENTS ATTENTION 3.1 Scanning double sided documents...
  • Page 82: Selecting A Color To Drop Out

    CONTENTS 3.5 Selecting a color to drop out Introduction A selected color (red, green, blue) can be removed (dropped out) from the scanned image data. For example, if the document contains black 1 NAMES AND FUNCTIONS OF PARTS text in green frames, you can set the scanner to get only the text and eliminate the green frames. 2 BASIC SCANNER OPERATION To drop out a color, change the setting in the driver setting dialog box.
  • Page 83 CONTENTS 3.5 Selecting a color to drop out (Continued from the previous page) Introduction 2. Select the color to drop out from [Dropout Color] under [More]. For example, if the document contains black text in green frames, you 1 NAMES AND FUNCTIONS OF PARTS can set the scanner to get only the text and eliminate the green frames.
  • Page 84: Skipping Blank Pages

    CONTENTS 3.6 Skipping blank pages Introduction Change settings in the [TWAIN Driver] dialog box for skipping blank pages at scanning documents. 1 NAMES AND FUNCTIONS OF PARTS 1. Click [Option] button in the [TWAIN Driver] dialog box. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths...
  • Page 85 CONTENTS 3.6 Skipping blank pages (Continued from the previous page) Introduction 2. Click the [Job/Cache] tab. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out...
  • Page 86 CONTENTS 3.6 Skipping blank pages (Continued from the previous page) Introduction 4. With the slider control under [Blank Page Skip], specify the Blank Page Skip degree. 1 NAMES AND FUNCTIONS OF PARTS <In Binary/Halftone mode> 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size...
  • Page 87: Detecting Double-Feeds

    CONTENTS 3.7 Detecting double-feeds Introduction "Double-feed" is an error that occurs when two or more sheets are accidentally fed into the ADF at the same time. You can set the scanner to 1 NAMES AND FUNCTIONS OF PARTS display an error message when it detects a double-feed. 2 BASIC SCANNER OPERATION To set conditions for the double-feed detection, change the settings in the [TWAIN Driver] dialog box.
  • Page 88 CONTENTS 3.7 Detecting double-feeds (Continued from the previous page) Introduction 2. Click the [Job/Cache] tab. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out...
  • Page 89 CONTENTS 3.7 Detecting double-feeds (Continued from the previous page) Introduction 3. Select the detection conditions from [Double Feed Detection] under [ADF Option]. The following are the detection conditions 1 NAMES AND FUNCTIONS OF PARTS None Double-feed detection is not performed 2 BASIC SCANNER OPERATION The scanner monitors the overlapping of documents.It detects a double-feed by differences in document 3 SCANNING VARIOUS TYPES OF DOCUMENTS...
  • Page 90 CONTENTS 3.8 Correcting skewed documents Introduction With the TWAIN driver's [Automatic Size and Skew detection], you can set the scanner so that skew of documents are detected and 1 NAMES AND FUNCTIONS OF PARTS corrected automatically when skewed documents are fed into the ADF. 2 BASIC SCANNER OPERATION Change the setting in the [TWAIN Driver] dialog box to enable this function.
  • Page 91 CONTENTS 3.8 Correcting skewed documents (Continued from the previous page) Introduction 3. Select the "Automatic page size detection"] from the [Automatic Size and Skew Detection] menu. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size...
  • Page 92 CONTENTS Chapter 4 DAILY CARE Introduction This chapter describes how to clean the scanner. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 4.1 Cleaning materials and locations requiring cleaning 4.2 Cleaning the ADF 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING...
  • Page 93 CONTENTS 4.1 Cleaning material and locations requiring cleaning Introduction 1. Cleaning material 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Cleaning material Part No. Remarks 3 SCANNING VARIOUS TYPES OF DOCUMENTS Cleaning paper CA99501-0012 Used with Cleaner F1 4 DAILY CARE 4.1 Cleaning materials and locations requiring cleaning Cleaner F1...
  • Page 94 CONTENTS 4.1 Cleaning material and locations requiring cleaning (Continued from the previous page) Introduction 2. Locations requiring cleaning 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Part Names of parts Using cleaning paper with Cleaner F1 Using Cloth with Cleaner F1 Using Cotton swab with Cleaner F2 3 SCANNING VARIOUS TYPES OF DOCUMENTS per 10,000 scans...
  • Page 95: Cleaning The Adf

    CONTENTS 4.2 Cleaning the ADF Introduction 4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1 1 NAMES AND FUNCTIONS OF PARTS Cleaning the Brake roller, Glasses, Sheet guides, Plastic rollers 2 BASIC SCANNER OPERATION 1. Open the ADF while pushing the ADF button. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 2.
  • Page 96 CONTENTS 4.2 Cleaning the ADF (Continued from the previous page) Introduction 4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1 1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page) 2 BASIC SCANNER OPERATION Cleaning the Pick roller set 3 SCANNING VARIOUS TYPES OF DOCUMENTS 1.
  • Page 97 CONTENTS 4.2 Cleaning the ADF (Continued from the previous page) Introduction 4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1 1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page) 2 BASIC SCANNER OPERATION Cleaning the Chute roller 3 SCANNING VARIOUS TYPES OF DOCUMENTS Open the Chute roller cover and clean the Chute roller using a cloth moisten with Cleaner F1.
  • Page 98 CONTENTS 4.2 Cleaning the ADF (Continued from the previous page) Introduction 4.2.2 Cleaning the ADF using Cleaning paper 1 NAMES AND FUNCTIONS OF PARTS 1. Open the ADF while pushing the ADF button. 2 BASIC SCANNER OPERATION 2. Apply Cleaner F1 on a new piece of cleaning paper. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.
  • Page 99 CONTENTS Chapter 5 REPLACING CONSUMABLES Introduction This chapter describes how to replace scanner consumables. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.3 Replacing the pick roller set 6 TROUBLESHOOTING...
  • Page 100: Consumable And Replacement Cycle

    CONTENTS 5.1 Consumable and Replacement Cycle Introduction The following table shows the specifications of consumables and guidelines for the replacement cycle. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Description Parts No. Standard Replacement Cycle Brake roller PA03338-K010 After 250,000 scans or one year 3 SCANNING VARIOUS TYPES OF DOCUMENTS Pick roller*...
  • Page 101 1. When turning on the power, check that the scanner is connected to your PC. 3 SCANNING VARIOUS TYPES OF DOCUMENTS Refer to "2.2 Connecting the Scanner to a PC" in fi-5650C Getting Started for information about connecting the scanner to your personal computer.
  • Page 102 2. From [Start] menu, select [All Programs] - [Scanner Utility for Microsoft Windows] and click [Software Operation Panel]. 1 NAMES AND FUNCTIONS OF PARTS The [FUJITSU Software Operation Panel] window appears. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS...
  • Page 103 CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction 3. Click the [Device Setting] tab. 1 NAMES AND FUNCTIONS OF PARTS The following panel appears. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller...
  • Page 104 CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction The following message may appear while you use the scanner: 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller...
  • Page 105: Replacing The Brake Roller

    CONTENTS 5.2 Replacing the brake roller Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.3 Replacing the pick roller set 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF...
  • Page 106 CONTENTS 5.3 Replacing the pick roller set Introduction 1. Open the ADF while pushing the ADF button. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.3 Replacing the pick roller set 6 TROUBLESHOOTING...
  • Page 107 CONTENTS Chapter 6 TROUBLESHOOTING Introduction This chapter describes how to remedy document jams, other troubles, items to check before contacting the dealer where you bought the 1 NAMES AND FUNCTIONS OF PARTS scanner, and how to check the device labels. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE...
  • Page 108: Removing Jammed Documents

    CONTENTS 6.1 Removing jammed documents Introduction 1 NAMES AND FUNCTIONS OF PARTS CAUTION 2 BASIC SCANNER OPERATION -The glass surface inside the ADF becomes hot during the operation. Be careful not to touch the glass surface inside the ADF. 3 SCANNING VARIOUS TYPES OF DOCUMENTS -Be careful not to pinch your fingers with the ADF.
  • Page 109 * "U6" and "U7" are temporary errors related with the Imprinter option (sold separately). 9 OPTIONS HINT 10 SCANNER SPECIFICATIONS Error Recover Guide is stored in Setup CD-ROM. When installing the application software, refer to "2.3.3 Installing other application Appendix programs" in fi-5650C Getting Started. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 110 When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function No. display, contact the dealer 8 DOCUMENT SPECIFICATION OF ADF where you purchased the scanner or an authorized FUJITSU scanner service provider. 9 OPTIONS...
  • Page 111 When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function No. display, turn off the scanner, remove the additional memory board and check that the scanner functions correctly. Return the memory board where the memory was purchased or contact an authorized FUJITSU scanner service provider. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 112 If you cannot solve the problem after checking the remedies in the Trouble shooting table, contact the dealer where you bought the scanner 4 DAILY CARE or an authorized FUJITSU scanner service provider. Before you ask for repair service, please collect the following information. 5 REPLACING CONSUMABLES...
  • Page 113 CONTENTS 6.3 Items to check before contacting the dealer where you bought the scanner (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Please print out the Check List as below, it will be displayed on a new window when you click the link, and fill as much information as possible before contacting the agent.
  • Page 114: Trouble Shooting

    CONTENTS Trouble Shooting Introduction 1 NAMES AND FUNCTIONS OF PARTS The scanner cannot be turned ON. 2 BASIC SCANNER OPERATION The Function No. display indicates an alarm after the scanner is powered ON. 3 SCANNING VARIOUS TYPES OF DOCUMENTS Indication on the Function No. display goes out. The scanning does not start. 4 DAILY CARE The scanning does not start.
  • Page 115 "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized 8 DOCUMENT SPECIFICATION OF ADF FUJITSU service provider. 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 116 6.2 Indications of operator panel for errors you bought the scanner" and contact the dealer or an authorized 6.3 Items to check before contacting the dealer where you FUJITSU service provider. bought the scanner 6.4 Checking labels on the scanner 7 ONLINE SETUP...
  • Page 117 "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized 8 DOCUMENT SPECIFICATION OF ADF FUJITSU service provider. 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 118 If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 119 "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized 8 DOCUMENT SPECIFICATION OF ADF FUJITSU service provider. 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 120 6.2 Indications of operator panel for errors FUJITSU service provider. 6.3 Items to check before contacting the dealer where you bought the scanner 6.4 Checking labels on the scanner...
  • Page 121 If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 122 "6.3 Items to check before contacting the dealer where 7 ONLINE SETUP you bought the scanner" and contact the dealer or an authorized 8 DOCUMENT SPECIFICATION OF ADF FUJITSU service provider. 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 123 If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 124 If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 125 If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 126 7 ONLINE SETUP From [Start] menu, select [All Programs] - [Scanner Utility for 8 DOCUMENT SPECIFICATION OF ADF Microsoft Windows] and click [FUJITSU Software Operation Panel]. Click the [Device Setting] on the [FUJITSU Software Normal Operation 9 OPTIONS Operation Panel] window, then...
  • Page 127 Microsoft Windows] and click [FUJITSU Software Operation 3 SCANNING VARIOUS TYPES OF DOCUMENTS Did you adjust the offset (starting position for scanning the Panel]. Click the [Device Setting] on the [FUJITSU Software document)? 4 DAILY CARE Operation Panel] window, then adjust [Sub] under [Offset Setting].
  • Page 128: General Details

    Displayed error message (For support engineers, please record the error message and send images of captured screen.) Meaning Findings Model (Example) fi-5650C Interface (Example) SCSI interface (Example) 000001 Serial No. (*) (Example) made by Adaptec SCSI Card 2940AU Interface controllers...
  • Page 129 CONTENTS 6.4 Checking labels on the scanner Introduction The following illustrations are samples of the product labels of fi-5650C Image Scanner. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE...
  • Page 130 CONTENTS Chapter 7 ONLINE SETUP Introduction This chapter describes settings of fi-5650C Image Scanner using "Software Operation Panel". 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES...
  • Page 131 1 NAMES AND FUNCTIONS OF PARTS configure various settings for fi-5650C with user-friendly interfaces. To start this application, select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. Details of settings are as follows:...
  • Page 132 CONTENTS 7.1 Online setup (Continued from the previous page) Introduction The following shows the contents of the setup: 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Function Description Settings Default Use this function to drop out a color in 3 SCANNING VARIOUS TYPES OF DOCUMENTS Dropout Color Red/Green/Blue/White...
  • Page 133: Double-Feed Detection

    If the detected length deviation is within the specified tolerance, it will not be detected as an error. ATTENTION Change the double feed configure of the FUJITSU TWAIN32 Scanner driver before you change the double feed configure in the [Software Operation Panel]. It will take precedence FUJITSU TWAIN32 Scanner driver.
  • Page 134 Appendix ATTENTION If you configure the Page Edge Filter in both [Software Operation Panel] and [FUJITSU TWAIN32 Scanner Driver], the images of [Software Operation Panel] configuration will overwrite the images of FUJITSU TWAIN32 Scanner Driver configuration. All Rights Reserved, Copyright (C) PFU LIMITED 2004...
  • Page 135: Setting Dropout Color

    Set a color to be dropped out as follows. 1 NAMES AND FUNCTIONS OF PARTS 1. Select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. 2 BASIC SCANNER OPERATION 2. Click [Device Setting 2] tab, and select [Dropout color] from [Preferences].
  • Page 136: Setting Of Pre-Pick Mode

    The settings of the pre-pick mode are as follows. 1 NAMES AND FUNCTIONS OF PARTS 1. Select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. 2 BASIC SCANNER OPERATION 2. Click [Device Setting 2] tab, and select [Pre-Pick] from [Preferences].
  • Page 137 Reset the consumables counters as follows. 1 NAMES AND FUNCTIONS OF PARTS 1. Select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. 2 BASIC SCANNER OPERATION 2. Click [Device Setting] tab.
  • Page 138: Adjusting The Offset

    The settings for adjusting the offset are as follows. 1 NAMES AND FUNCTIONS OF PARTS 1. Select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. 2 BASIC SCANNER OPERATION 2. Select [Device Setting] tab and click [Offset] button.
  • Page 139 The the setting for the magnification is as follows. 1 NAMES AND FUNCTIONS OF PARTS 1. From [Start] menu click [All Programs], select [Scanner Utility for Microsoft Windows] and click [FUJITSU Software Operation Panel]. 2 BASIC SCANNER OPERATION 2. Select [Device Setting] tab and click [Offset] button.
  • Page 140: Power Saving

    The setting for the power saving is as follows. 1 NAMES AND FUNCTIONS OF PARTS 1. Select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. 2 BASIC SCANNER OPERATION 2. Select [Device Setting] tab.
  • Page 141 CONTENTS Chapter 8 DOCUMENT SPECIFICATION OF ADF Introduction This chapter describes the required document sizes and paper quality for ensuring a correct operation when scanning documents on the ADF. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING...
  • Page 142: Document Size

    CONTENTS 8.1 Document size Introduction The following shows the size of documents that can be scanned. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 8.1 Document size...
  • Page 143: Document Quality

    CONTENTS 8.2 Document quality Introduction It is recommended to use documents of wood free paper and wood containing paper. When using other kinds of papers, perform a test- 1 NAMES AND FUNCTIONS OF PARTS scanning with a few sheets of the same type before executing the actual task in order to check whether or not the documents can be scanned.
  • Page 144 CONTENTS 8.2 Document quality (Continued) Introduction Do not use the following documents: 1 NAMES AND FUNCTIONS OF PARTS Paper-clipped or stapled documents 2 BASIC SCANNER OPERATION Documents on which the ink is still wet Documents smaller than A8 (Portrait) in size 3 SCANNING VARIOUS TYPES OF DOCUMENTS Documents wider than A3 or 11 in.
  • Page 145: Maximum Adf Capacity

    CONTENTS 8.3 Maximum ADF capacity Introduction The maximum number of sheets that can be loaded on the ADF paper chute is determined by the size and weight of the documents. The 1 NAMES AND FUNCTIONS OF PARTS following shows the maximum document loading capacity of the ADF according to the paper weight. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE...
  • Page 146 CONTENTS 8.4 Area not to be perforated Introduction Document trouble might occur if there are punched holes in the shaded area of a document sheet shown below. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING...
  • Page 147 CONTENTS 8.5 Double feed detection conditions Introduction To obtain a correct monitoring and preventing miss detections of doublefeeds, the documents have to meet the following conditions. 1 NAMES AND FUNCTIONS OF PARTS Check overlapping 2 BASIC SCANNER OPERATION Paper weight : 41 g/m 2 - 203 g/m 2 (10.9 lb to 53.9 lb) 3 SCANNING VARIOUS TYPES OF DOCUMENTS Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document.
  • Page 148: Background Color Areas

    CONTENTS 8.6 Background Color Areas Introduction Paper white detection is performed in the shaded area as shown in the Figure below. The top 3mm area on both sides of a document, should 1 NAMES AND FUNCTIONS OF PARTS have no printing. When the [White Level Follower] is selected, the color of this area must be the dropout color (color you want to remove) or the document's 2 BASIC SCANNER OPERATION background color (white) .
  • Page 149: Job Separation Sheet

    CONTENTS 8.7 Job Separation Sheet Introduction 1. Shape 1 NAMES AND FUNCTIONS OF PARTS The following shows the typical format of the job separation sheet. 2 BASIC SCANNER OPERATION Document width must be Letter (8.5 inch) / A4 size width (210mm) or wider. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES...
  • Page 150 CONTENTS Chapter 9 OPTIONS Introduction This chapter describes the options (sold separately) for fi-5650C Image Scanner. 1 NAMES AND FUNCTIONS OF PARTS fi-5650C Image Scanner option. 2 BASIC SCANNER OPERATION Name Spec Description 3 SCANNING VARIOUS TYPES OF DOCUMENTS Prints characters in the back side of the document after performing the...
  • Page 151: Extended Memory Board

    2. Insert the memory boards into the slots and push it down so that the boards are fixed in by the claws. 10 SCANNER SPECIFICATIONS Appendix 3. Secure the screws to fix the covers. The following memory boards are recommendable for using with fi-5650C Color Image Scanner. Manufacturer Model Memory Size...
  • Page 152 CONTENTS Chapter 10 SCANNER SPECIFICATIONS Introduction This chapter lists the scanner specifications. 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS 10.1 Basic Specification...
  • Page 153 CONTENTS 10.1 Basic Specifications Introduction 1 NAMES AND FUNCTIONS OF PARTS Items Specification Remarks Operating method Automatic Document Feeder(ADF) 2 BASIC SCANNER OPERATION Image sensor Color CCD (Charge-coupled device) x 2 Front/Back 3 SCANNING VARIOUS TYPES OF DOCUMENTS Light source Incandescent cold cathode fluorescent lamp x4 Front/Back 4 DAILY CARE...
  • Page 154 CONTENTS 10.1 Basic Specifications (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Items Specification Remarks Basic 600 dpi 2 BASIC SCANNER OPERATION Black&White Optical resolution Grayscale/Color Output 50 dpi to 600 dpi 3 SCANNING VARIOUS TYPES OF DOCUMENTS Grayscale level 24 bits/pixel (Color), 8 bits/pixel (Grayscale), 1 bit/pixel (Binary) 4 DAILY CARE...
  • Page 155 CONTENTS 10.2 Installation specifications Introduction 1 NAMES AND FUNCTIONS OF PARTS Items Specification Width Depth Height 2 BASIC SCANNER OPERATION Dimension (With ADF paper chute extension and stacker 639 mm 428 mm 301 mm extension retracted) 3 SCANNING VARIOUS TYPES OF DOCUMENTS (25.2 in) (16.9 in) (11.9 in)
  • Page 156: External Dimensions

    CONTENTS 10.3 External dimensions Introduction The external dimension of the fi-5650C Image Scanner 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP...
  • Page 157 CONTENTS 10.3 Physical dimensions (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS 10.1 Basic Specification...
  • Page 158 CONTENTS Appendix Introduction The Appendix is structured as follows: 1 NAMES AND FUNCTIONS OF PARTS Appendix 1 Before using [Scan] button and [Send to] button 2 BASIC SCANNER OPERATION Appendix 2 Glossary 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP...
  • Page 159 CONTENTS Appendix 1 Before using [Scan] button and [Send to] button Introduction By setting the link of the application software to the [ Scan ] button and [ Send to ] button, you can launch the linked application by simply 1 NAMES AND FUNCTIONS OF PARTS pushing the button.
  • Page 160 CONTENTS Appendix 1 Before using [Scan] button and [Send to] button (Continued from the previous page) Introduction 5. Select the application executed by the event. 1 NAMES AND FUNCTIONS OF PARTS For Windows XP, select [ Performing selected program ] under [ Performing ] and then select the application to be processed. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE...
  • Page 161 -For Windows 95 and Windows NT 4.0: 1 NAMES AND FUNCTIONS OF PARTS 1. Right click [ FUJITSU Scanner Control Center ] on the task trail and select [ Option ]. 2 BASIC SCANNER OPERATION 2. Select the event for starting up the application from the [ Event ] menu.

This manual is also suitable for:

5650c - fi vrs