Consumable And Replacement Cycle - Fujitsu FI-5650C Operator's Manual

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES

5.1 Consumable and replacement cycle

5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.1 Consumable and Replacement Cycle
The following table shows the specifications of consumables and guidelines for the replacement cycle.
Description Parts No. Standard Replacement Cycle
Brake roller PA03338-K010 After 250,000 scans or one year
Pick roller* PA03338-K011 After 250,000 scans or one year
* A set of two rollers.
The replacement cycles above are rough guidelines for the case of using A4/Letter wood free or wood containing paper 64 g/m 2 (17 lb). This
cycle varies according to the type of the used paper and how frequently the scanner is used and cleaned.
ATTENTION
Use only the specified consumables.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
1 | 2 | 3 | 4 | 5