Fujitsu FI-5650C Operator's Manual page 123

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Symptom : Double-feed errors occur frequently.
Back to the trouble shooting index
Do the documents satisfy the conditions described in
Document Quality"?
YES
When the double-feed detection is ON, are the double feed
detection conditions satisfied?
YES
Were the documents fanned before loaded onto the ADF paper
chute?
YES
Have the documents just been printed out by a copier or laser
printer?
NO
Is the document stack over 20mm(A4)/10mm(A3)?
NO
Are all the consumables (Pick roller set, Brake roller) installed
correctly?
YES
Is any of consumables (Pick roller set, Brake roller) dirty?
NO
Is any of consumables (Pick roller set, Brake roller) worn out?
Check the consumable counter.
NO
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
"8.2
Use documents that satisfy the requirements.
NO
Satisfy the double-feed detection conditions.
NO
Fan the documents
sheets of the documents.
NO
Fan the documents
the paper.
YES
Reduce the number of sheets in the stack, referring to
Maximum ADF capacity".
YES
Correctly install the
needed.
NO
Clean the dirty consumable.
YES
Replace the consumable, if needed. Refer to
consumable counter.
YES
before loading, or reduce the number of
3 or 4 times to remove static electricity from
"8.3
consumable(Pick roller set, Brake roller), if
"" for details on the