Fujitsu FI-5650C Operator's Manual page 61

•
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Loading documents onto the ADF
2.3 Scanning documents
2.4 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.4 How to use the Scanner Driver (Continued from the previous page)
[Imprinter...] button
Opens the Imprinter Configuration dialog box. Used for setting the strings to be printed by the imprinter.
ATTENTION
This function is available only when the Imprinter (sold separately) is installed to the scanner.
[JEPG...] button
Opens the JPEG Settings dialog box. Used for setting the compression rate of JPEG transfer.
[About...] button
This button displays the version information.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29