Scanning Documents - Fujitsu FI-5650C Operator's Manual

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Loading documents onto the ADF

2.3 Scanning documents

2.4 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.3 Scanning documents
1. Load documents onto the ADF paper chute.
Pull out the ADF paper chute extension according to the length of the document. For details on how to load documents, refer to
Loading documents onto the ADF".
2. Start ScandAll 21.
Select [ Start ] - [ Program ] - [Scanner Utility for Microsoft Windows] and click [ScandAll 21].
This starts up ScandAll 21.
3. Select [Select Source] from the [Scan] menu.
The [Select Source] dialog box appears.
4. Select"FUJITSU fi-5650Cdj"(for Windows 95 and WindowsNT 4.0, select "FUJITSU TWAIN 32") and click the [Select] button.
HINT
The scanning procedure described in this section were explained by using the scanner driver application software, Fujitsu
TWAIN, provided with this product.
You can scan using other applications software that complies with the TWAIN standard.
Scanning can also be performed by installing the Fujitsu ISIS Scanner Driver.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
1 | 2 | 3
"2.2