Fujitsu FI-5650C Operator's Manual page 125

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Symptom : Paper jams occur frequently.
Back to the trouble shooting index
Do the documents satisfy the conditions described in
Document Quality"?
YES
Is there any debris in the ADF?
NO
Are all the consumables (Pick roller set, Brake roller) installed
correctly?
YES
Is any of consumables (Pick roller set, Brake roller) dirty?
NO
Is any of consumables (Pick roller set, Brake roller) worn out?
Check the consumable counter.
NO
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
"8.2
Use documents that satisfy the requirements.
NO
Clean the ADF or remove debris from the ADF.
YES
Correctly install the consumable
needed.
NO
Clean the dirty consumable UI.
YES
Replace the consumable, if needed. Refer to
Consumables" for details on the consumable counter.
YES
(Pick roller set, Brake roller) , if
"Replacing