Dataprobe iBoot-PDU4-N15 Manual page 71

Cloud Services
get cloud
Returns the Status of the Cloud Service settings
iBoot-PDU> get cloud
Cloud Enabled: false
Cloud Address: iboot.co
Cloud Activation Code: <none>
Cloud Activation UUID: <none>
Cloud Username: Demo
Cloud Password: myPassword
Cloud Location: 1b-LAB
Cloud Status:
OK
set cloud enabled <true | false>
set cloud address <IP | FQDN>
set cloud username <cloud username>
set cloud password <cloud password>
set cloud location <cloud location>
iBoot-PDU_v230829w
Cloud Activation Code and Cloud Activation UUID will be assigned by the
cloud server and then displayed, after Cloud enabled is set true, and the
unit is in the cloud account.
When cloud enabled is true, no settings can be changed other than to set
cloud enabled.as false.
Cloud Status will indicate any errors that occurred during activation and
will display as "Active" when unit is in an account.
FALSE
iboot.co
iBoot-PDU User Manual
Set as true as the last step to enable the
cloud service. (after setting parameters).
This should remain iboot.co unless change
requested by Dataprobe support.
Cloud Account Username
Cloud Account Password
This is an optional setting
If location is not specified, the device is
added to the unassigned location.
if location exists, the device is added to the
location.
if location does not exist, the location is
created, and the device is added to the
location.
Page 71