Dataprobe iBoot-PDU4-N15 Manual page 59

del sequence <name>
set sequence <name> <run | stop>
set sequence <oldname> name <newname>
set sequence <name> enabled <true | false>
set sequence <name> maxcount <1-100>
del sequence <name> action <1-n | all>
Sequence Actions
add sequence <name> action
del sequence <name> action <1-n>
set sequence <name> action <1-n> type <none |
delay | outlet | group | sequence | log | loop>
set sequence <name> action <old#> position
<new#>
iBoot-PDU_v230829w
FALSE
100
iBoot-PDU User Manual
20 characters & special characters
Set the maximum number of steps allows for
sequence execution. Prevents sequences
from excessive looping
n is the last number of sequence steps.
When a number is deleted, all remaining
steps are renumbered automatically.
Sets the type of action. See Section 5.7 for
type descriptions.
Reorders an action step. All subsequent
steps are moved down by one and prior
steps are renumbered.
Page 59