Console - Dataprobe iBoot-PDU4-N15 Manual

Enable or Disable the ability to receive DxP messages. DxP is disabled by default.
Set the DxP port. The default is 9100
Set the use of AES encryption and the AES passphrase when AES is enabled.
Click Save when done.
6.8.

Console

Sets the features regarding the CLI for both Serial Port control via the USB ports and Telnet.
Console Settings
Serial Enabled
Console Timeout
Telnet Enabled
Telnet Port
SSH Enabled
SSH Port
Serial Baud Rate
Note: Ports 8888, 8889, 8890, 8891, 8892, 8893, 8894, 8895, 8896, 8897, 9090, 8898 and 8899 are
reserved for internal use by the iBoot-PDU. Do not use these ports for any other setting.
iBoot-PDU_v230829w
Enables [True] or disables [False] the serial port for console management
Sets the time in minutes for automatic logout of the console session.
Enables [True] or disables [False] the telnet server
Sets the IP Port the telnet server will use
SSH will be available in a future release.
Please check for firmware updates and release notice.
Sets the IP port used for SSH connections.
Sets the Baud Rate for the Serial port. Available options are
9600, 19200, 38400, 57600 and 115200.
iBoot-PDU User Manual Page 29