Device Setup; Information - Dataprobe iBoot-PDU4-N15 Manual

6.1.

Information

Set basic information about the iBoot-PDU
Device Information Fields
Device Name
Outlet Delay Time
Unit of
Temperature
Country Code
Allow Simple
Passwords
Device Reboot
The Reboot button will reboot the iBoot-PDU system. A confirmation box will appear. Select OK to initiate
the Reboot.
iBoot-PDU_v230829w

6. Device Setup

Set the Name of the Device displayed. 20 alphanumeric characters, no spaces
Device Name is also used for SNMP Management, mib-2, sysLocation.
( OID 1.3.6.1.2.1.1.6 )
Sets the time, in seconds between powering each outlet when multiple outlets
are being turned on. Minimizes inrush current issues.
Celsius or Fahrenheit
Select Country Code from the dropdown list.
Simple Passwords are any characters, 20 maximum
If unchecked (default), passwords must be a minimum of 8 characters, up to 20
characters and contain at least one each of
Upper Case Character
Lower Case Character
Number
Special Character
iBoot-PDU User Manual
See section 9.2 for a list of allowed characters.
Page 23