Nms - Dataprobe iBoot-PDU4-N15 Manual

8.5.

NMS

Network Management Systems. Setup the iBoot-PDU for use with SNMP and Syslog servers.
SNMP Setup
Enable SNMP by checking SNMP Enable
Set the read- and write- community passwords if necessary and click save.
To add SNMP Managers to receive traps, click on Add SNMP Managers
Manager Name
Manager IP
Address
trapcommunity
Click the Save Button to store the settings
The iBoot-PDU supports SNMP v2c and v3. Download the mib at
*note: The Device | Location Name will be used as the Management, mib-2, sysLocation
(OID 1.3.6.1.2.1.1.6)
The administrator user email will be used as the Management, mib-2, sysContact
(OID 1.3.6.1.2.1.1.4)
iBoot-PDU_v230829w
Enter a name for the SNMP manager
Enter the IP Address or FQDN name of the manager
Set trapcommunity string to be used for traps and informs only (default public)
iBoot-PDU User Manual
http://dataprobe.com/support-iboot-pdu
Page 44