Advertisement
5.7.
Sequences
Sequences are a set of actions that can be initiated with a single command. Sequences can contain outlet,
group and messaging actions. Sequences can also include delays
and looping to build sophisticated sets of instructions.
Add Sequences
Click on Add Sequence to begin the setup process.
Enter the name of the sequence then click Save.
The status of the sequence is displayed on the top right of the card. Statuses are:
Disabled
The sequence is disabled for editing or to prevent execution
Stopped
The sequence is enabled, but execution has been halted A Run button will be presented
to initiate the sequence
Running
The sequence is currently running. A Stop button will be presented to halt the sequence.
Enable Checkbox determines if the sequence is available to be executed
Show on Dashboard determines if the sequence card will be displayed on the Dashboard
iBoot-PDU_v230829w
iBoot-PDU User Manual
Instructional Video
Page 20
Advertisement
Need help?
Do you have a question about the iBoot-PDU4-N15 and is the answer not in the manual?
Questions and answers