Twisted Pair; Fiber-Optic; Cables - HP J4093A Installation Manual

Connectors and Cables

Cables

Twisted-Pair
10 Mbps Operation
100 Mbps Operation

Fiber-Optic

10Base-FL
100Base-FX
Gigabit-SX
Gigabit-LX
B-2
Category 3, 4, or 5 100-ohm unshielded twisted-pair (UTP)
or shielded twisted-pair (STP) cable, complying with IEEE
802.3 Type 10Base-T specifications, fitted with RJ-45
connectors
Category 5 100-ohm UTP or STP cable, complying with
IEEE 802.3u 100Base-TX specifications, fitted with RJ-45
connectors
62.5/125 m or 50/125 m (core/cladding) diameter, graded-
index, multimode fiber-optic cables, complying with the
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a respec-
tively, fitted with ST connectors
62.5/125 m or 50/125 m (core/cladding) diameter, graded-
index, multimode fiber-optic cables, complying with the
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a respec-
tively, fitted with SC connectors
62.5/125 m or 50/125 m (core/cladding) diameter, graded-
index, multimode fiber-optic cables, complying with the
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a respec-
tively, fitted with SC connectors
single mode fiber-optic cables, complying with the ITU-T
G.652 and ISO/IEC 793-2 Type B1 standards, fitted with SC
connectors
OR
62.5/125 m or 50/125 m (core/cladding) diameter, graded-
index, multimode fiber-optic cables, complying with the
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a respec-
tively, fitted with SC connectors
Note: Multimode fiber-optic cabling may be used for a
Gigabit-LX application, but a mode conditioning patch
cord may be needed. See the Installation Guide that came
with your module for more information.