Figure 2-21 Attaching Ferrites To A Css 11050 Or 11150 Console Cable - Cisco CSS-11051-AC Hardware Installation Manual

Chapter 2 Cabling the CSS
•
•
On the CSS 11050 or 11150 console cable, you must attach two snap-on ferrites
provided in the Accessory kit. The ferrites guarantee proper console operation.
To attach the snap-on ferrites (see
1.
2.

Figure 2-21 Attaching Ferrites to a CSS 11050 or 11150 Console Cable

78-15146-02
Parity: none
Stop Bits: 1
Position and attach the first ferrite .75 inches from the RJ-45 connector to the
Console port.
Attach the second ferrite behind the first ferrite.
Snap-on ferrite .75 inch space between
(one of two)
Cisco 11000 Series Content Services Switch Hardware Installation Guide
Figure 2-21):
CO N SO LE
the ferrite and the
RJ-45 connector
Connecting the Console to the CSS
2-33