Cabling the CSS 11800 Modules
Gigabit Ethernet Module LEDs
Cisco 11000 Series Content Services Switch Hardware Installation Guide
2-20
The GEM front panel LEDs indicate module status (Power, Status, and Ready
LEDs) and network status for each of the connectors (Transmit, Receive, and Link
LEDs).
Table 2-7
describes the GEM LEDs.
Table 2-7
Gigabit Ethernet Module LED Descriptions
LED Name
Color
Power
Green
Status
Yellow
Ready
Green
Tx (Transmit)
Green
(Ports 1 to 4)
Rx (Receive)
Green
(Ports 1 to 4)
Link/Sync
Green
(Ports 1 to 4)
LED Status
Indicates
Off
Module does not have power
On
Module has power
Off
Module is operational
On
Module is experiencing an error
Off
Module not initialized
On
Module initialized and ready
Off
No transmit packet activity
Blinking
Transmit activity detected
Off
No receive packet activity
Blinking
Receive activity detected
Off
No link
On
Link exists and synchronization
achieved
Blinking
Link exists but not synchronized
Chapter 2
Cabling the CSS
78-15146-02