Cabling the CSS 11800 Modules
SFM and SFM2 LEDs
Internal Disk Module LEDs
Cisco 11000 Series Content Services Switch Hardware Installation Guide
2-24
The SFM and SFM2 front panel LEDs indicate operating and configuration status.
Table 2-8
describes the SFM LEDs.
Table 2-8
Switch Fabric Module LED Descriptions
LED Name
Color
Power
Green
Status
Yellow
Active
Green
The Internal Disk Module (IDM) in slot 15 contains Power, Status, and Active
LEDs.
Figure 2-16
illustrates the IDM front panel LEDs. The LEDs apply to both
the flash-based (model CSS8-IDM-MEM-FD) or hard drive-based (model
CSS8-IDM-MEM-HD) IDM.
LED Status
Indicates
Off
Module does not have power
On
Module has power
Off
Module is operational
On
Module is experiencing an error (only
when the SFM is active; the LED is
normally yellow when the SFM is
passive)
Off
SFM is passive
On
SFM is active
Chapter 2
Cabling the CSS
78-15146-02