Figure 2-14 Switch Fabric Module Connectors And Leds - Cisco CSS-11051-AC Hardware Installation Manual

Cabling the CSS 11800 Modules
Figure 2-14

Figure 2-14 Switch Fabric Module Connectors and LEDs

Module ejector
Module ejector
The SFM2 contains two RJ-45 RS-232 Diag1 and Diag 2 connectors, combining
both Console and Diag functions on each connector (all of these connectors are
reserved for field service diagnostic use only).
Cisco 11000 Series Content Services Switch Hardware Installation Guide
2-22
illustrates the SFM front panel LEDs and connectors.
Chapter 2
Power LED
Status LED
Active LED
Debug console
and diag console
Cabling the CSS
78-15146-02