Installing The Css Into The Rack; Figure 1-2 Front-Mounting The Brackets On The Css 11050 Or Css 11150; Figure 1-3 Mid-Mounting The Brackets On The Css 11050 And Css 11150 - Cisco CSS-11051-AC Hardware Installation Manual

Installing the CSS 11050 or CSS 11150

Installing the CSS into the Rack

Cisco 11000 Series Content Services Switch Hardware Installation Guide
1-8
Figure 1-2 Front-Mounting the Brackets on the CSS 11050 or CSS 11150
Mounting
bracket
Figure 1-3 Mid-Mounting the Brackets on the CSS 11050 and CSS 11150
Mounting
bracket
Secure the bracket to the CSS with four screws.
3.
4. Repeat steps 2 and 3 to install a mounting bracket on the other side of the
CSS.
You are ready to install the CSS in the cabinet.
Before you begin, you will need a #2 Phillips screwdriver and four pan-head
screws. To install the CSS 11050 or CSS 11150 into an equipment rack:
Raise the CSS to the installation height. Align the screw holes on the
1.
mounting bracket with the holes on the equipment rack.
Chapter 1 Unpacking and Installing the CSS
Mounting
bracket
Mounting
bracket
78-15146-02