Site Requirements; Required Tools And Equipment; Shipment Contents - Cisco CSS-11051-AC Hardware Installation Manual

Site Requirements

Site Requirements

Required Tools and Equipment

Shipment Contents

Cisco 11000 Series Content Services Switch Hardware Installation Guide
1-2
Before you select an installation site for the CSS, read the electrical,
environmental, and physical requirements as described in Appendix A,
Specifications. If you are installing a DC unit (CSS 11150 or CSS 11800 only),
ensure that you read and follow the DC power supply safety warnings in
Appendix A, Specifications.
To install the CSS hardware, you need the following tools and equipment:
A Phillips and a flat-head screwdriver
•
Anti-static wrist strap (included in the CSS 11800 accessory kit)
•
• Hand lift (recommended) for lifting the CSS 11800 chassis into the
equipment rack
Once you complete the installation, you need a console terminal (or equivalent)
that runs at 9600 bps to issue console commands.
The CSS 11050, CSS 11150, and CSS 11800 shipment contains the following
items except where noted:
• Content Services Switch
Anti-static wrist strap (CSS 11800 only)
•
Four rubber feet (CSS 11050 and CSS 11150)
•
• Mounting brackets and hardware (CSS 11050 and CSS 11150)
Chapter 1 Unpacking and Installing the CSS
78-15146-02