Figure 1-4 Aligning Brackets On The Css 11800 For Mid-Mounting - Cisco CSS-11051-AC Hardware Installation Manual

Installing the CSS 11800
Figure 1-4 Aligning Brackets on the CSS 11800 for Mid-Mounting
Mounting
bracket
Mounting
key
Cisco 11000 Series Content Services Switch Hardware Installation Guide
1-10
2. Position the mounting bracket onto the middle of one side of the CSS, lining
up the front screw holes on the bracket with the holes on the side of the
chassis.
Using a Phillips screwdriver, install only five of the seven #10-32 pan-head
3.
screws through the mid-mount bracket holes into the CSS. Do not install the
screws in the top of the bracket or second from the bottom of the bracket.
4. Repeat steps 1 through 3 to install the second bracket onto the other side of
the chassis.
When the brackets are in position for mounting the chassis in a rack, proceed to
the "Rack-Mounting the CSS 11800 Chassis"
Chapter 1 Unpacking and Installing the CSS
Mounting
bracket
Mounting
key
section.
78-15146-02