Installing And Removing The Optional Table Top Stand - NEC MultiSync M431-2 User Manual

Installing and Removing the Optional Table Top Stand

For installation, follow the instructions included with the stand or mounting equipment. Use only those devices recommended by
the manufacturer.
NOTE:
• M431-2, M501-2, and M551-2 use ST-43M. M651-2 use ST-65M.



• For the ST-43M, ONLY use screws which are included with the optional table top stand.
For the ST-65M, ONLY use thumbscrews and attach the stand holders which are included with the optional table top
stand. Install the stand so the long end of the feet face forward.

• The monitor can only be used in the landscape orientation with the tabletop stand.
M431-2
M501-2 ST-43M (screws are included)
M551-2
M651-2 ST-65M (thumbscrews, screws, and stand holders are included)
M651-2
Optional stand holder
M431-2/M501-2/M551-2
Table
200 mm (M431-2)
400 mm (M501-2/M551-2)
English−18
Optional table top stand
Soft cloth