Ventilation Requirements - NEC MultiSync M431-2 User Manual

Ventilation Requirements

When mounting in an enclosed space or recessed area, leave adequate room between the monitor and the enclosure to allow
heat to disperse, as shown below.
NOTE: • Allow adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away


from the unit and the mounting equipment; especially when you use monitors in a multiple screen configuration.

• This monitor has internal temperature sensors.
If the monitor overheats, a "Caution" warning appears. If the "Caution" warning appears, stop using the unit, turn off


the power and allow it to cool.
If the monitor is used in an enclosed area or if the LCD panel is covered with a protective screen, and the


temperature is higher than the normal operating temperature, please turn the cooling fan to [ON] within the
[FAN CONTROL] menu within the OSD (see
≥ 100 mm
≥ 100 mm
page 86).
English−16
<40 °C
≥ 30 mm