Advertisement
Installing a safety wire
NOTE:
When installing, do not apply pressure to the LCD panel or excessive force to any part of the monitor by pushing or
leaning on it. This may cause the monitor to become distorted or damaged.
Handles for safety wire
Attach the safety wire to the handles shown in the figure below.
Orientation
•
When using the monitor in the portrait position, it should be rotated counterclockwise so that the right side is moved to the
top and the left side is moved to the bottom. Improper ventilation may shorten the lifetime of the monitor.
•
If installed in the wrong orientation, heat may be trapped inside the main unit and the lifetime of the monitor may be
shortened.
•
It cannot be installed upside down.
Safety wire for portrait
position (M651-2 only)
Safety wire for landscape position
English−15
Power Indicator
Advertisement
Need help?
Do you have a question about the MultiSync M431-2 and is the answer not in the manual?
Questions and answers