Setting The Aspect Ratio - NEC MultiSync M431-2 User Manual

Setting the Aspect Ratio

Press the ASPECT button on the remote control to cycle through the options available for the current input signal.
NOTE: [Media Player] is not available.


[FULL] [WIDE] [1:1]
➙ ➙
Aspect ratio of
Unchanged view*
image
4:3
Squeeze
Letterbox
* : Gray areas indicate unused portions of the screen.
2
[1:1]: Shows the image in a 1 by 1 pixel format.
[ZOOM]
• The zoom function increases the image size, which expands the image beyond the active screen area. The parts of the
image outside the active screen area are not shown.
[ZOOM] [NORMAL]
➙ ➙
Recommended selection for picture
2
[NORMAL]
[FULL]
[WIDE]
ZOOM
aspect*
2
Reproduces the aspect ratio that is sent from
the source.
Fills the entire screen.
Expands a 16:9 letter box signal to fill the entire
screen.
ZOOM
English−37
Description