Installing And Removing The Optional Table Top Stand - NEC MultiSync UN552V User Manual

Installing and Removing the Optional Table Top Stand

CAUTIONN: • Installing and removing the stand must be done by two or more people.
• When installing the monitor stand, handle the unit with care to avoid pinching your fingers.
For installation, follow the instructions included with the stand or mounting equipment. Use only those devices recommended by
the manufacturer.


NOTEN: • ONLY use thumbscrews which are included in the monitor.

• Install the stand so the long end of the feet face forward. Use the ST-5220.
Prevent Tipping


CAUTIONN:
When using the monitor with the optional table top stand, fasten the monitor to a wall using a cord or chain that can support
the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided
clamps and screws.
Before attaching the monitor to the wall, make sure that the wall can support the weight of the monitor.


CAUTIONN: Be sure to remove the cord or chain from the wall before moving the monitor.
Table
325.9 mm
Screw Holes
Clamp
Screw (M4)
English−14
Optional table top stand
Soft cloth
Cord or chain